1. Catalogs
  2. RHEINTACHO Messtechnik GmbH
  3. Sensor: 2-Channel Hall FE series

Sensor: 2-Channel Hall FE series

Sensor: 2-Channel Hall FE series
1 / 12 PagesView full catalog

Sensor: 2-Channel Hall FE series

Product catalog summary
Technical Data Sheet Overview

Introduction:
This document provides a technical overview of the RHEINTACHO 2-Channel Hall Flange FE series speed sensor, which is designed for accurate measurement, control, and indication of rotational speeds.

Applications:
The sensor is suitable for detecting the speed of gearwheels with small modules and high resolution, and is applicable in vehicles, mobile operating machines, and electric and hydraulic drives.

Features:
The sensor offers various output signals, a compact size, and requires alignment. It supports a wide temperature and frequency range, provides two frequency outputs or one frequency and one digital direction output, and features a push-pull output signal.

Specifications:
- Power Supply: 8 VDC to 32 VDC
- Frequency Range: 0 Hz to 15 kHz
- Operating Temperature: -40°C to +125°C (-40°F to +257°F)
- Degree of Protection: IP6K9K / IP67

Mounting and Installation:
The sensor has directional dependence with an asymmetric flange. The maximum tightening torque for the fixing screw is 8 Nm, and the bending radius of the connection cable is 15 mm. The housing is made of brass with a perpendicular cable outlet. Careful handling is required to prevent damage during installation.

Electrical Specifications:
- Current consumption: < 30 mA @ 30 VDC
- Includes short circuit immunity and reverse polarity protection.
- Insulation strength: 500 VDC
- Output signal level: Low < 2 V, High > UB - 2 V
- Duty cycle: 50% ±20%
- Phase shift for motion: 90° ±45°

Environmental Conditions:
The sensor is resistant to brine, hydraulic oils, diesel oils, and cleaning fluids. It meets vibration and shock resistance standards as per EN standards and complies with EMC standards.

Safety Instructions:
Installation should be performed by trained specialists. Ensure the machine is in a safe condition before commissioning. Do not use defective components and maintain a safe distance from heat sources and radio systems. Inspect for transport damage and avoid using dropped sensors.

Connection and Wiring:
Sensor wires should be short and shielded, avoiding routing near high-power lines. Cables should be secured to prevent mechanical stress and preferably routed internally within vehicles.

Specifications and Intended Use:
The speed sensor must operate within specified parameters such as voltage, temperature, vibration, and shock. Usage outside these conditions can lead to safety hazards and component damage.

Improper Use:
Using the speed sensor outside the intended specifications or in explosive areas is prohibited. Damages from improper use void warranty and liability claims.

Connection and Wiring Guidelines:
Sensor lines should be shielded, short, and connected to the ground. Avoid routing near power lines and ensure cables are mechanically secured and protected from sharp edges.

Safety-Related Functions:
The customer must conduct a risk analysis and implement safety measures such as redundancy and emergency switches. Necessary product data for safety assessments are available upon request.

Disposal:
Dispose of the speed sensor according to national regulations.
See more

Catalog excerpts

Sensor: 2-Channel Hall FE series-1

Drehzahlen sicher erfassen, anzeigen und kontrollieren >RHEIN^ For reliable measurement, control and indication of rotational speeds fTACHOr^ Technisches Datenblatt / Technical Data Sheet Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg

 Open the catalog to page 1
Sensor: 2-Channel Hall FE series-2

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Kurzdaten Versorgung Data summary Power supply Frequency range Drehzahlerfassung an Zahnrädern mit kleinem Modul und hoher Auflösung Speed detection of gearwheels with small module and high resolution Anwendung in Fahrzeugen, mobilen Arbeitsmaschinen, elektrischen und hydraulischen Antrieben Applications in vehicles, mobile operating machines, electric and hydraulic drives Verschiedene Signalausgänge verfügbar Choice of different output signal Kleine Bauform...

 Open the catalog to page 2
Sensor: 2-Channel Hall FE series-3

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Tauchtiefe / Insert. depth Anschluss / Connection ca. 1,0 m Kabel ohne Stecker / approx. 1.0 m cable without plug Ausgang / Output Stecker / Plug Signal / Signal ohne Stecker / without plug 1-Kanal Frequenzausgang und ein digitales Drehrichtungssignal / 1-channel frequency output and one digital direction output 2-Kanal Frequenzausgang / 2-channel frequency output Lieferumfang / Scope of delivery Sensor mit O-Ring / Sensor with O-ring Verpackung / Packaging...

 Open the catalog to page 3
Sensor: 2-Channel Hall FE series-4

Drehzahlsensor / Speed Sensor ^TACHO^ 2-Kanal Hall Flansch FE Baureihe / LLr^—l 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Einbau / Mounting RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg

 Open the catalog to page 4
Sensor: 2-Channel Hall FE series-5

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Elektrische Daten / Electrical Specifications Versorgung / Power supply Stromaufnahme / Current consumption Frequenzbereich / Frequency range Strombelastbarkeit / Current load Kurzschlussfest / Short circuit immunity Verpolungsschutz Versorgungsleitungen / Reverse polarity protection power supply lines Isolationsfestigkeit / Insulation strength Ausgang / Output Rechteck, 2-Frequenzsignal, Push-Pull / Rectangle, 2-frequency signal, Push-Pull Rechteck, 1-Frequenzsignal...

 Open the catalog to page 5
Sensor: 2-Channel Hall FE series-6

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Einsatzbedingungen / Environmental conditions Betriebstemperaturbereich, Sensor / Operating temperature range, sensor Medienbeständigkeit des Gehäuses / Environmental resistance of housing Salzwasser und diverse Hydrauliköle, Dieselöle, Reinigungsmittel, Salznebel (EN 60068-2-11): 48 h / Brine and various hydraulic oils, diesel oils, cleaning fluids, Salt spray (EN 60068-2-11): 48 h Druckfestigkeit der Messfläche / Max. pressure on sensing surface Schutzart...

 Open the catalog to page 6
Sensor: 2-Channel Hall FE series-7

Drehzahlsensor / Speed Sensor ^TACHOr 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Zeichnungen / Drawings RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg

 Open the catalog to page 7
Sensor: 2-Channel Hall FE series-8

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Zeichnungen / Drawings Einbaulage Toleranz / Installation tolerance Drehrichtung / Direction of rotation rechts im Uhrzeigersinn / right clockwise links, gegen Uhrzeigersinn / left, counter clockwise RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de

 Open the catalog to page 8
Sensor: 2-Channel Hall FE series-9

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Zeichnungen / Drawings Freimaßtoleranzen nach DIN ISO 2768-m / General tolerances according to DIN ISO 2768-m Allgemeine Rauheit von Oberflächen: Ra = 3,2 / General roughness of surfaces: Ra = 3.2 RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de

 Open the catalog to page 9
Sensor: 2-Channel Hall FE series-10

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Sicherheitshinweise / Safety Instructions Allgemeine Hinweise General instructions Vor Festlegung Ihrer Konstruktion verbindliche Einbauzeichnung Before finalizing your design request a certified installation drawing. Any suggested circuits do not imply any technical liability for the system on Eventuelle Schaltungsvorschläge beinhalten keinerlei system- technische Verantwortung für die Anlage. Öffnen des Drehzahlsensors, Änderungen bzw. Reparaturen am...

 Open the catalog to page 10
Sensor: 2-Channel Hall FE series-11

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Hinweise zur Beschaltung und Leitungsführung Notes regarding the connection and the wiring Leitungen zu den Drehzahlsensoren sind so kurz wie möglich und Lines to the speed sensors are to be shielded and kept as short as possible geschirmt auszuführen. Die Abschirmung ist einseitig an der Elektronik oder niederohmig an der Geräte- bzw. Fahrzeugmasse anzuschließen. Der Drehzahlsensor sollte nur im spannungslosen Zustand gesteckt Die Sensorleitungen sind...

 Open the catalog to page 11
Sensor: 2-Channel Hall FE series-12

Drehzahlsensor / Speed Sensor 2-Kanal Hall Flansch FE Baureihe / 2-Channel Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Einsatz in sicherheitsrelevanten Funktionen Es ist die Verantwortung des Kunden, eine Risikoanalyse seines The customer is responsible for performing risk analysis on the entire Gesamtsystems durchzuführen und die möglichen sicherheits- relevanten Funktionen zu bestimmen. Es ist die Verantwortung des Kunden, in sicherheitsrelevanten Anwendungen geeignete Maßnahmen zur Erreichung der Sicherheit zu ergreifen (Sensorredundanz, Plausibilitätsprüfung, Notschalter,...

 Open the catalog to page 12

All RHEINTACHO Messtechnik GmbH catalogs and technical brochures

  1. Speed sensors

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.