1. Catalogs
  2. RHEINTACHO Messtechnik GmbH
  3. Sensor: 2-Channel Differential-Hall M12 + temp. series

Sensor: 2-Channel Differential-Hall M12 + temp. series

Sensor: 2-Channel Differential-Hall M12 + temp. series
1 / 10 PagesView full catalog

Sensor: 2-Channel Differential-Hall M12 + temp. series

Product catalog summary
Product Overview: The document provides details on the RHEINTACHO 2-Channel Differential-Hall M12 series speed sensor, highlighting its temperature detection capabilities and its use in measuring, controlling, and indicating rotational speeds.
Specifications:
  • Power Supply: 7 VDC to 32 VDC
  • Frequency Range: 0 Hz to 20 kHz
  • Operating Temperature: -40°C to +125°C (-40°F to +257°F)
  • Degree of Protection: IP67 when the plug is connected
Features:
  • Includes temperature detection
  • Wide frequency range
  • Push-pull output signal
  • Requires alignment for installation
Applications: The sensor is suitable for detecting rotational speed and direction in gearwheels with small modules and high resolution, applicable in vehicles, mobile machines, and electric and hydraulic drives.
Mounting and Installation:
  • Requires a DIN type thread with special alignment
  • Maximum tightening torque for fixing screw is 10 Nm
  • Air gap for module 1.25 is 0.2 mm to 1.7 mm, and for module 2 is 0.2 mm to 3.5 mm
  • Handle with care to prevent damage
Electrical Specifications:
  • Current Consumption: 30 mA at 32 V
  • Short Circuit Immunity: Yes
  • Reverse Polarity Protection: Yes
  • Insulation Strength: 200 VDC
  • Output Signal Level: Vlow < 1.5 V, Vhigh > (Vsupply – 3.5 V)
Environmental Conditions:
  • Pressure Resistance: 10 bar (145 psi)
  • Vibration Resistance: 4h each direction, various frequencies
  • Shock Proof: 50g, 11 ms, 3 shocks per direction
  • Temperature Cycles: 100 cycles from -40°C to +125°C
  • MTTF: 150 years at +60°C
Safety Instructions:
  • Request certified installation drawings before finalizing designs
  • Do not open, modify, or repair the sensor
  • Ensure the system is safe before commissioning
  • Do not use defective components
  • Contact RHEINTACHO for specific application instructions
Transport and Storage:
  • Inspect for transport damage and report immediately
  • Do not use the sensor if dropped, as unseen damage may occur
Specifications and Installation Guidelines: The document outlines installation and operational guidelines, emphasizing the importance of shielding sensor cables, keeping them short, and avoiding routing near power-conducting lines. Cables should be secured near the sensor and routed inside the vehicle when possible.
Intended Use: The sensor must operate within specified voltage, temperature, vibration, and shock parameters to avoid safety hazards and component damage.
Improper Use: Using the sensor outside defined parameters or in explosive environments is prohibited and voids warranty and liability claims.
Safety-Related Functions: Customers must conduct risk analyses and implement safety measures such as sensor redundancy and emergency switches. Product data for safety assessments are available upon request.
Disposal: The sensor must be disposed of according to national regulations.
Technical Changes and Liability: The manufacturer reserves the right to make technical changes without notice and excludes liability for errors despite careful preparation.
See more

Catalog excerpts

Sensor: 2-Channel Differential-Hall M12 + temp. series-1

Drehzahlen sicher erfassen, anzeigen und kontrollieren For reliable measurement, control and indication of rotational speeds M12 Technisches Datenblatt / Technical Data Sheet Drehzahlsensor / Speed Sensor 2-Kanal Hall-Differenz M12 Baureihe / 2-Channel Differential-Hall M12 series Zusätzliches Feature: Temperaturerfassung Additional feature: Temperature detection Kabel im Lieferumfang nicht enthalten (verwendbares Kabel z. Bsp: ERNI, Artikel-Nr. 223923). Alternativ: Elektronikdistributoren wie z.B. RS Components, Conrad, Reichelt, … Suchbegriff: M12 Sensorkabel 5 Pins / Cable is not included in the scope of delivery (suitable cable e.g.: ERNI, Part-No. 223923). Alternatively: Electronic distributors, e.g. RS Components, Conrad, Reichelt, ... Search term: M12 sensor cable 5 pins. RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de

 Open the catalog to page 1
Sensor: 2-Channel Differential-Hall M12 + temp. series-2

Drehzahlsensor / Speed Sensor 2-Kanal Hall-Differenz M12 Baureihe mit Temperaturerfassung / 2-Channel Differential-Hall M12 series with temperature detection f \ IP67 V_) Technisches Datenblatt / Technical Data Sheet Kurzdaten Versorgung 7 VDC ... 32 VDC Schutzart (bei gestecktem Stecker) IP67 Data summary Power supply 7 VDC ... 32 VDC Degree of protection (at connected plug) IP67 Anwendung ♦ Drehzahl- und Drehrichtungserfassung an Zahnradern mit kleinem Modul und hoher Auflosung ♦ Anwendung in Fahrzeugen, mobilen Arbeitsmaschinen, elektrischen und hydraulischen Antrieben ♦ Exakte Phasenverschiebung...

 Open the catalog to page 2
Sensor: 2-Channel Differential-Hall M12 + temp. series-3

Technisches Datenblatt / Technical Data Sheet Produktionscharge / Production lot Artikelnummer / Part number Produktkennzeichnung / Product marking Jahr Jahr Woche Woche Charge (Charge) auf Sensor, Stecker, Kabel oder Kabel-Clip (je nach Typ) / Year Year Week Week Lot (Lot) on sensor, plug, cable or cable-clip (depending on type) RHEINTACHO Artikelnummer gedruckt auf Sensor, Stecker, Kabel oder Kabel-Clip (je nach Typ) / RHEINTACHO part number printed on sensor, plug, cable or cable-clip (depending on type) RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg phone +49 761 4513...

 Open the catalog to page 3
Sensor: 2-Channel Differential-Hall M12 + temp. series-4

Technisches Datenblatt / Technical Data Sheet Gehausewerkstoff / Housing material Messing / Brass Versorgung / Power supply RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg phone +49 761 4513 0 • fax +49 761 445274 • www.rheintacho.de

 Open the catalog to page 4
Sensor: 2-Channel Differential-Hall M12 + temp. series-5

Drehzahlsensor / Speed Sensor 2-Kanal Hall-Differenz M12 Baureihe mit Temperaturerfassung / 2-Channel Differential-Hall M12 series with temperature detection Technisches Datenblatt / Technical Data Sheet Temperaturerfassung / Temperature detection Temperatursignal / temperature signal NTC 4,7 kOhm, ±1 % Der Widerstandswert kann über Pin 3 und Pin 5 ausgelesen werden. / Resistance value can be read out via Pin 3 and Pin 5. Temperature Resistance Characteristics R-low (k ohm) Resistance Value [kOhm] Anschlüsse / Connections Anschlussbelegung Stecker / Plug terminal assignment Pin 1: VDC Pin 2:...

 Open the catalog to page 5
Sensor: 2-Channel Differential-Hall M12 + temp. series-6

Technisches Datenblatt / Technical Data Sheet * Die Berechnung der MTTFd wurde nach der in der DIN EN ISO 13849-1 im Anhang C.5 & D.1 vorgeschlagenen Methode durchgefuhrt. Die Ermittlung erfolgte nach dem Part-Counts-Verfahren und der SN29500. Dabei wurde angenommen, dass jeder zweite Ausfall gefahrbringend ist. D.h. die Bestimmung des MTTFd-Wertes erfolgte nicht durch eine tiefergehende Schaltungsanalyse des Produktes selbst. / The calculation of the MTTFd was carried out according to the method proposed in DIN EN ISO 13849-1 in appendix C.5 & D.1. The determination was made according to the...

 Open the catalog to page 6
Sensor: 2-Channel Differential-Hall M12 + temp. series-7

Drehzahlsensor / Speed Sensor 2-Kanal Hall-Differenz M12 Baureihe mit Temperaturerfassung / 2-Channel Differential-Hall M12 series with temperature detection Technisches Datenblatt / Technical Data Sheet Zeichnungen / Drawings RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de

 Open the catalog to page 7
Sensor: 2-Channel Differential-Hall M12 + temp. series-8

Drehzahlsensor / Speed Sensor 2-Kanal Hall-Differenz M12 Baureihe mit Temperaturerfassung / 2-Channel Differential-Hall M12 series with temperature detection Technisches Datenblatt / Technical Data Sheet Sicherheitshinweise / Safety Instructions Allgemeine Hinweise General instructions Vor Festlegung Ihrer Konstruktion verbindliche Einbauzeichnung Before finalizing your design request a certified installation drawing. Any suggested circuits do not imply any technical liability for the system on Eventuelle Schaltungsvorschläge beinhalten keinerlei system- technische Verantwortung für die Anlage....

 Open the catalog to page 8
Sensor: 2-Channel Differential-Hall M12 + temp. series-9

Drehzahlsensor / Speed Sensor 2-Kanal Hall-Differenz M12 Baureihe mit Temperaturerfassung / 2-Channel Differential-Hall M12 series with temperature detection Technisches Datenblatt / Technical Data Sheet Hinweise zur Beschaltung und Leitungsführung Notes regarding the connection and the wiring Leitungen zu den Drehzahlsensoren sind so kurz wie möglich und Lines to the speed sensors are to be shielded and kept as short as possible geschirmt auszuführen. Die Abschirmung ist einseitig an der Elektronik oder niederohmig an der Geräte- bzw. Fahrzeugmasse anzuschließen. Der Drehzahlsensor sollte nur...

 Open the catalog to page 9
Sensor: 2-Channel Differential-Hall M12 + temp. series-10

Drehzahlsensor / Speed Sensor 2-Kanal Hall-Differenz M12 Baureihe mit Temperaturerfassung / 2-Channel Differential-Hall M12 series with temperature detection Technisches Datenblatt / Technical Data Sheet Einsatz in sicherheitsrelevanten Funktionen Es ist die Verantwortung des Kunden, eine Risikoanalyse seines The customer is responsible for performing risk analysis on the entire In safety-related applications, the customer is responsible for taking Gesamtsystems durchzuführen und die möglichen sicherheits- relevanten Funktionen zu bestimmen. Es ist die Verantwortung des Kunden, in sicherheitsrelevanten...

 Open the catalog to page 10

All RHEINTACHO Messtechnik GmbH catalogs and technical brochures

  1. Speed sensors

    4  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.