*mydirectindustry

Catalogs
RHEINTACHO Messtechnik GmbH
Sensor: 1-Channel M18 Stainless steel series

Sensor: 1-Channel M18 Stainless steel series

Product catalog summary

Overview: The document is a technical data sheet for the 1-Channel Hall M18 series speed sensor by RHEINTACHO Messtechnik GmbH. It outlines the specifications, features, and installation guidelines for the sensor, which is designed for accurate measurement, control, and indication of rotational speeds in various applications.

Applications: This speed sensor is ideal for detecting gearwheel speeds with small modules and high resolution. It is commonly used in vehicles, mobile operating machines, and hydraulic drives, conforming to the DIN M18 installation dimension.

Features: The sensor operates from 0 Hz without requiring alignment and is constructed from stainless steel. It supports a frequency range of 0 Hz to 15 kHz and functions within a temperature range of -40°C to +125°C. The protection level ranges from IP67 to IP69K, depending on the model.

Technical Specifications: The sensor operates on a power supply of 8 VDC to 36 VDC, with a current consumption of less than 20 mA. It can handle a maximum output current of 500 mA at 24 VDC and 50 mA at 36 VDC. It is protected against short circuits and reverse polarity.

Mounting and Installation: Featuring a DIN type thread, the sensor requires no special alignment. Care must be taken to avoid damage to the face and seal. The recommended tightening torque is 20 Nm, and the connection cable should have a bending radius of 50 mm.

Environmental Conditions: The sensor is designed to withstand vibration (15 g at 1 Hz to 2 kHz) and shock (30 g at 11 ms). It complies with standards such as EN 60947-5-2 and the EN 61000 series for electromagnetic compatibility.

Safety Instructions: The document stresses careful handling of the sensor, ensuring safe conditions during commissioning, and replacing any defective components. Guidelines for installation, transport, and storage are provided to prevent damage and ensure reliability.

Connection Details: Detailed information on cable and plug terminal assignments for different sensor types is included to ensure correct electrical connections.

Specifications and Installation Guidelines: Cables should not be routed near other power-conducting lines and must be mechanically secured near the sensor installation area. They should ideally be routed inside the vehicle and must not be kinked or twisted.

Intended Use: The sensor must operate within specified ranges for voltage, temperature, vibration, shock, and other environmental factors. Use outside these conditions may pose safety risks and cause damage.

Improper Use: Any use not described under "Intended Use" is considered improper, including use in explosive areas, which voids warranty and liability claims.

Connection and Wiring Notes: Sensor lines should be shielded, kept short, and connected to the ground via a low-resistance connection. The sensor should only be connected or disconnected when de-energized.

Use in Safety-Related Functions: Customers must conduct a risk analysis and define safety-related functions, implementing suitable safety measures such as sensor redundancy and plausibility checks.

Disposal: Disposal must comply with national regulations.

Additional Notes: Technical changes may occur without prior notice, and liability for errors is excluded. A CE-Conformity declaration is available upon request.

Catalog excerpts

Sensor: 1-Channel M18 Stainless steel series-1

Drehzahlen sicher erfassen, anzeigen und kontrollieren For reliable measurement, control and indication of rotational speeds M18 Technisches Datenblatt / Technical Data Sheet Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de

Open the catalog to page 1

Sensor: 1-Channel M18 Stainless steel series-2

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Kurzdaten Versorgung Data summary Power supply Frequency range Drehzahlerfassung an Zahnrädern mit kleinem Modul und hoher Auflösung Speed detection of gearwheels with small module and high resolution Anwendung in Fahrzeugen, mobilen Arbeitsmaschinen und hydraulischen Antrieben Applications in vehicles, mobile operating machines and in hydraulic drives Richtungsunabhängiger Einbau Stainless steel RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg...

Open the catalog to page 2

Sensor: 1-Channel M18 Stainless steel series-3

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Gehäuse / Housing Gewinde / Thread Nutzbare Gewindelänge / Useable thread length Ausgang / Output Anschluss / Connection ca. 1000 mm Kabel ohne Stecker / approx. 1000 mm cable without plug Stecker / Plug ca. 1000 mm Kabel ohne Stecker / approx. 1000 mm cable without plug am Kabel montierter 4-poliger Sure-Seal ITT Cannon Stecker / 4-pin Sure-Seal ITT Cannon plug mounted on the cable ohne Stecker / without plug Lieferumfang / Scope of delivery ca. 500 mm Kabel mit Stecker...

Open the catalog to page 3

Sensor: 1-Channel M18 Stainless steel series-4

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Einbau / Mounting Einbauart / Mounting principle Einschraubgewinde, richtungsunabhängig / DIN type thread, no special alignment required Anzugsmoment / Tightening torque Biegeradius Anschlusskabel / Bending radius of connection cable Schalt- / Einbauabstand / Air gap 50 mm 3,2 mm @ 1 kHz; M4 Basis: Evolventenverzahnung / 3.2 mm @ 1 kHz; M4 basis: involute gear Maximaler Einbauabstand bezogen auf Modul und Arbeitsfrequenz / Maximum air gap related to module and working...

Open the catalog to page 4

Sensor: 1-Channel M18 Stainless steel series-5

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Elektrische Daten / Electrical Specifications Versorgung / Power supply Stromaufnahme / Current consumption Anschlussschaltbild (NPN) / Electrical connection (NPN) Prinzipschaltbild / Circuit diagram Frequenzbereich / Frequency range Max. Ausgangsstrom / Max. output current Kurzschlussfest / Short circuit immunity Gegen alle Leiter / against all terminals Verpolungsschutz / Reverse polarity protection Gegen alle Leiter / against all terminals Berechnung des minimalen...

Open the catalog to page 5

Sensor: 1-Channel M18 Stainless steel series-6

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Einsatzbedingungen / Environmental conditions Betriebstemperaturbereich, Sensor / Operating temperature range, sensor Druckfestigkeit der Messfläche / Max. pressure on sensing surface Schutzart / Degree of protection (DIN EN 60529) Vibration / Vibration resistance (IEC 60068-2-6) Schock / Shock resistance (IEC 60068-2-27) Stoß / Bump proof (IEC 60068-2-29) 20 bar 25 bar IP69K IP69K IP69K, Stecker IP67 / IP69K, connector IP67 IP69K, Stecker IP67 / IP69K, connector IP67...

Open the catalog to page 6

Sensor: 1-Channel M18 Stainless steel series-7

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Blau: Masse Braun: +8...36VDC Schwarz: Signal Datum Name Bearb. 12.08.04 M. Peter Gepr. Norm F RHEINTACHO Zust. Vertraulich. Diese Zeichnung darf ohne Freimaßtoleranzen unsere Genehmigung weder nach vervielfältigt noch dritten DIN ISO 2768-m Personen und Konkurrenzfirmen zugänglich gemacht werden Sure Seal Vertraulich. Diese Zeichnung darf ohne Freimaßtoleranzen unsere Genehmigung weder nach vervielfältigt noch dritten DIN ISO 2768-m Personen und Konkurrenzfirmen zugänglich...

Open the catalog to page 7

Sensor: 1-Channel M18 Stainless steel series-8

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet 8...36VDC Masse (ground) nicht verbunden (not connected) Signal (signal) RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de

Open the catalog to page 8

Sensor: 1-Channel M18 Stainless steel series-9

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Sicherheitshinweise / Safety Instructions Allgemeine Hinweise General instructions Vor Festlegung Ihrer Konstruktion verbindliche Einbauzeichnung Before finalizing your design request a certified installation drawing. Any suggested circuits do not imply any technical liability for the system on Eventuelle Schaltungsvorschläge beinhalten keinerlei system- technische Verantwortung für die Anlage. Öffnen des Drehzahlsensors, Änderungen bzw. Reparaturen am Drehzahlsensor...

Open the catalog to page 9

Sensor: 1-Channel M18 Stainless steel series-10

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Hinweise zur Beschaltung und Leitungsführung Notes regarding the connection and the wiring Leitungen zu den Drehzahlsensoren sind so kurz wie möglich und Lines to the speed sensors are to be shielded and kept as short as possible geschirmt auszuführen. Die Abschirmung ist einseitig an der Elektronik oder niederohmig an der Geräte- bzw. Fahrzeugmasse anzuschließen. Der Drehzahlsensor sollte nur im spannungslosen Zustand gesteckt Die Sensorleitungen sind empfindlich...

Open the catalog to page 10

Sensor: 1-Channel M18 Stainless steel series-11

Drehzahlsensor / Speed Sensor 1-Kanal Hall M18 Baureihe / 1-Channel Hall M18 series Technisches Datenblatt / Technical Data Sheet Einsatz in sicherheitsrelevanten Funktionen Es ist die Verantwortung des Kunden, eine Risikoanalyse seines The customer is responsible for performing risk analysis on the entire Gesamtsystems durchzuführen und die möglichen sicherheits- relevanten Funktionen zu bestimmen. Es ist die Verantwortung des Kunden, in sicherheitsrelevanten Anwendungen geeignete Maßnahmen zur Erreichung der Sicherheit zu ergreifen (Sensorredundanz, Plausibilitätsprüfung, Notschalter, ….)....

Open the catalog to page 11

All RHEINTACHO Messtechnik GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list