- Catalogs
- RHEINTACHO Messtechnik GmbH
- Sensor: 1-Channel Differential-Hall FE series
- Company
- Products
- Catalogs
- News & Trends
- Exhibitions
Sensor: 1-Channel Differential-Hall FE series
Sensor: 1-Channel Differential-Hall FE series
Product Overview:
The 1-Channel Differential-Hall Flange FE Series Speed Sensor by RHEINTACHO Messtechnik GmbH is designed for reliable measurement, control, and indication of rotational speeds. It is suitable for applications such as speed detection of gearwheels with small modules and high resolution, and use in vehicles, mobile operating machines, and electric and hydraulic drives.
Key Features:
- Offers various output signals.
- Compact design.
- Directional dependent installation.
- Operates over a wide temperature and frequency range.
Specifications:
- Power Supply: SDN11 (4.5 VDC - 24 VDC), SDN12 (12.5 VDC - 32 VDC).
- Frequency Range: 0.1 Hz - 20 kHz.
- Operating Temperature: Typical -40°C to +140°C, Max -40°C to +150°C.
- Protection Degree: IP6K9K / IP67.
Mounting and Installation:
- Directional dependence with asymmetric flange.
- Max tightening torque for fixing screw: 8 Nm.
- Minimum bending radius for connection cable: 15 mm.
- Handle carefully to prevent damage to sensor face and O-ring.
Electrical Specifications:
- Current Consumption: < 30 mA @ 30 VDC.
- Short Circuit Immunity: Yes, up to 50 mA.
- Reverse Polarity Protection: Yes, up to 50 mA.
- Insulation Strength: 500 VDC.
- Output: Rectangle, 1 frequency signal, Open Collector, without pull-up.
Environmental Conditions:
- Resistant to brine, hydraulic oils, diesel oils, cleaning fluids, and salt spray.
- Vibration and shock resistant as per EN standards.
- Temperature shock and cycle resistant.
Safety Instructions:
- Installation and commissioning should be done by trained specialists.
- Ensure vehicle and hydraulic systems are safe before commissioning.
- Replace faulty sensors immediately.
Transport and Storage:
- Inspect for transport damage; report any damage immediately.
- Do not use sensors that have been dropped.
Connection Details:
- Cable: 3-core, 0.35 mm², unshielded.
- Terminal Assignment: Red (VDC), Blue (Signal), Black (Ground).
Installation Guidelines:
Wiring should ideally be routed inside the vehicle. If external routing is necessary, ensure secure attachment and avoid kinking or twisting wires. Shield sensor lines and connect them to the ground, avoiding proximity to power lines.
Intended Use:
The sensor must operate within specified voltage, temperature, vibration, and shock ranges. Usage outside these conditions can lead to safety hazards and component damage.
Improper Use:
Using the sensor outside specified conditions or in explosive areas is prohibited and voids warranty and liability claims.
Safety-Related Functions:
Customers must conduct a risk analysis and implement safety measures such as redundancy and emergency switches. Product data for safety assessments are available upon request.
Disposal:
Dispose of the speed sensor according to national regulations.
Catalog excerpts
Drehzahlen sicher erfassen, anzeigen und kontrollieren For reliable measurement, control and indication of rotational speeds Technisches Datenblatt / Technical Data Sheet Drehzahlsensor / Speed Sensor 1-Kanal Hall-Differenz Flansch FE Baureihe / 1-Channel Differential-Hall Flange FE series RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de
Open the catalog to page 1
Drehzahlsensor / Speed Sensor 1-Kanal Hall-Differenz Flansch FE Baureihe / 1-Channel Differential-Hall Flange FE series Technisches Datenblatt / Technical Data Sheet 6K9K Kurzdaten Versorgung SDN11 Versorgung SDN12 Frequenzbereich Betriebstemperatur, typisch Betriebstemperatur, max. Schutzart Data summary Power supply SDN11 Power supply SDN12 Frequency range Operation temperature, typical Operation temperature, max. Degree of protection_ Anwendung ♦ Drehzahlerfassung an Zahnradern mit kleinem Modul und hoher Auflosung ♦ Anwendung in Fahrzeugen, mobilen Arbeitsmaschinen, elektrischen und hydraulischen...
Open the catalog to page 2
Technisches Datenblatt / Technical Data Sheet Produktionscharge / Production lot Artikelnummer / Part number Produktkennzeichnung / Product marking Chargennummer Jahr Jahr Woche Woche auf Sensor, Stecker, Kabel oder Kabel-Clip (je nach Typ) / Chargecode Year Year Week Week on sensor, plug, cable or cable-clip (depending on type) RHEINTACHO Artikelnummer gedruckt auf Sensor, Stecker, Kabel oder Kabel-Clip (je nach Typ) / RHEINTACHO part number printed on sensor, plug, cable or cable-clip (depending on type) RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg phone +49 761 4513...
Open the catalog to page 3
RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg phone +49 761 4513 0 • fax +49 761 445274 • www.rheintacho.de
Open the catalog to page 4
Technisches Datenblatt / Technical Data Sheet RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg phone +49 761 4513 0 • fax +49 761 445274 • www.rheintacho.de
Open the catalog to page 5
Drehzahlsensor / Speed Sensor 1-Kanal Hall-Differenz Flansch FE Baureihe / 1-Channel Differential-Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Zeichnungen / Drawings RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49 761 445274 · www.rheintacho.de
Open the catalog to page 6
Drehzahlsensor / Speed Sensor 1-Kanal Hall-Differenz Flansch FE Baureihe / 1-Channel Differential-Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Zeichnungen / Drawings Einbaulage Toleranz / Installation tolerance Drehrichtung / Direction of rotation rechts im Uhrzeigersinn / right clockwise links, gegen Uhrzeigersinn / left, counter clockwise Drehrichtung / Direction of rotation links, gegen Uhrzeigersinn / left, counter clockwise rechts im Uhrzeigersinn / right clockwise RHEINTACHO Messtechnik GmbH · Waltershofener Str. 1 · D-79111 Freiburg phone +49 761 4513 0 · fax +49...
Open the catalog to page 7
Technisches Datenblatt / Technical Data Sheet FreimaBtoleranzen nach DIN ISO 2768-m / General tolerances according to DIN ISO 2768-m 14644A1A Allgemeine Rauheit von Oberflachen: Ra = 3,2 / General roughness of surfaces: Ra = 3.2 RHEINTACHO Messtechnik GmbH • Waltershofener Str. 1 • D-79111 Freiburg phone +49 761 4513 0 • fax +49 761 445274 • www.rheintacho.de
Open the catalog to page 8
Drehzahlsensor / Speed Sensor 1-Kanal Hall-Differenz Flansch FE Baureihe / 1-Channel Differential-Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Sicherheitshinweise / Safety Instructions Allgemeine Hinweise General instructions Vor Festlegung Ihrer Konstruktion verbindliche Einbauzeichnung Before finalizing your design request a certified installation drawing. Any suggested circuits do not imply any technical liability for the system on Eventuelle Schaltungsvorschläge beinhalten keinerlei system- technische Verantwortung für die Anlage. Öffnen des Drehzahlsensors, Änderungen...
Open the catalog to page 9
Drehzahlsensor / Speed Sensor 1-Kanal Hall-Differenz Flansch FE Baureihe / 1-Channel Differential-Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Hinweise zur Beschaltung und Leitungsführung Notes regarding the connection and the wiring Leitungen zu den Drehzahlsensoren sind so kurz wie möglich und Lines to the speed sensors are to be shielded and kept as short as possible geschirmt auszuführen. Die Abschirmung ist einseitig an der Elektronik oder niederohmig an der Geräte- bzw. Fahrzeugmasse anzuschließen. Der Drehzahlsensor sollte nur im spannungslosen Zustand gesteckt Die...
Open the catalog to page 10
Drehzahlsensor / Speed Sensor 1-Kanal Hall-Differenz Flansch FE Baureihe / 1-Channel Differential-Hall Flange FE series Technisches Datenblatt / Technical Data Sheet Einsatz in sicherheitsrelevanten Funktionen Es ist die Verantwortung des Kunden, eine Risikoanalyse seines The customer is responsible for performing risk analysis on the entire Gesamtsystems durchzuführen und die möglichen sicherheits- relevanten Funktionen zu bestimmen. Es ist die Verantwortung des Kunden, in sicherheitsrelevanten Anwendungen geeignete Maßnahmen zur Erreichung der Sicherheit zu ergreifen (Sensorredundanz, Plausibilitätsprüfung,...
Open the catalog to page 11All RHEINTACHO Messtechnik GmbH catalogs and technical brochures
RT STROBE pocket rolux3 Pages
RT STROBE pocketLED LASER6 Pages
RT STROBE pocket LED6 Pages
ROTAS speed monitor2 Pages
RHEINTACHO Stroboscopes6 Pages
Speed sensors4 Pages
Sensor Targets4 Pages
Image Brochure RHEINTACHO4 Pages
Channel Hall M14 Heavy Duty6 Pages
LED band indicator 5846 Pages
RT STROBE 7000 LED2 Pages
RT STROBE 12000 LED2 Pages
Channel Hall Inch5 Pages
RT STROBE 3000 XENON2 Pages
RT STROBE 5000 XENON2 Pages
RT STROBE 3000 LED2 Pages
RT STROBE 5000 LED2 Pages
Direction detector 5751.0017 Pages
Hall sensors Zoll5 Pages
AC-DC power pack3 Pages
F/I F/U converter11 Pages
Electrical tachometers4 Pages
Mechanical Tachometers4 Pages
RT STROBE control2 Pages
Archived catalogs
Vision control systems6 Pages
Sensor: 2-Channel Hall FE series12 Pages
Product overview2 Pages
- Panel panel meter
- Analog indicator
- Illuminated indicator
- LED indicator
- Signal converter
- Magnetic speed sensor
- Rotational speed sensor
- Digital tachometer
- Handheld tachometer
- Non-contact tachometer
- Contact tachometer
- Hall effect speed sensor
- Non-contact speed sensor
- Speed indicator
- Portable stroboscope
- LED stroboscope
- Digital stroboscope
- Compact speed sensor
- IP67 speed sensor
- Speed switch