*mydirectindustry

Catalogs
RHEINTACHO Messtechnik GmbH
Channel Hall M14 Heavy Duty

Channel Hall M14 Heavy Duty

Product catalog summary

Overview: This technical data sheet provides detailed specifications for the discontinued 1 Channel Hall M14 Type speed sensors by RHEINTACHO Messtechnik GmbH. These sensors are designed for speed detection in various applications, including vehicles and hydraulic drives.

Specifications:

Power Supply: 8 to 36 V DC
Frequency Range: 0 to 15,000 Hz
Operating Temperature: -40 to +125°C (-40 to +260°F)
Degree of Protection: IP67, IP69K (depending on type)

Applications:

Speed detection of gearwheels with small module and high resolution
Used in vehicles, mobile operating machines, and hydraulic drives
Installation dimension: DIN M14

Features:

Detection from 0 Hz
No alignment required

Type Overview:

SHN11.GK11.E4: M14x1x60, Cable 3x0.34mm², shielded, TPE, 4m, NPN output
SHN11.GK12.E4: M14x1x80, Cable 3x0.34mm², shielded, TPE, 4m, NPN output
SHN11.GK13.SC: M14x1x120, Plug type SC, NPN output

Mounting:

Air gap: 3.5 mm @ 1KHz; M4 basis: involute gear
Mounting principle: DIN type thread, no special alignment required
Tightening torque: 18 Nm
Bending radius of connection cable: 50 mm
Housing material: Brass

Electrical Specifications:

Current consumption: <20 mA
Maximum output current: 500 mA @ 24 V DC, +25°C; 50 mA @ 36 V DC, +85°C
Output signal level: Low ≤ 2 V; High ≥ Ub-2V
Short circuit immunity and reverse polarity protection against all terminals

Environmental Conditions:

Operating temperature range: -40° to +125°C (-40° to +260°F)
Storage temperature: -40° to +125°C (-40° to +260°F)
Max. pressure on sensing surface: 5 bar
Vibration resistance: 15g @ 1...2,000Hz
Shock resistance: 30g @ 11ms
Bump proof: 40g @ 6ms

EMC Standards:

EN 50081-2, EN55011, EN55022
EN 50082-2, EN 61000-4-2 (ESD, Level B), EN 61000-4-3 (HF-Field, Level A), EN 61000-4-4 (Burst, Level B), EN 61000-4-6 (HF-Line, Level A)

Drawings: Installation drawings are available on page 5/6.

Note: Technical changes may occur without prior notice. No liability for errors or omissions.

Catalog excerpts

Technisches Datenblatt ■ Technical Data Sheet ABGEKÜNDIGT / DISCONTINUED Drehzahlsensoren ■ Speed Sensors 1 Kanal Hall M14 Familie ■ 1 Channel Hall M14 Type Kurzdaten Versorgung Frequenzbereich Betriebstemperatur Schutzart (IEC 529) Data summary Power supply Frequency range Operating temperature Degree of protection Anwendung ■ Drehzahlerfassung an Zahnrädern mit kleinem Modul und hoher Auflösung ■ Anwendung in Fahrzeugen, mobilen Arbeitsmaschinen und hydraulischen Antrieben ■ Einbaumaß M14 Applications ■ Speed detection of gearwheels with small module and high resolution. ■ Applications in vehicles, mobile operating machines and in hydraulic drives ■ Installation dimension DIN M14 Merkmale ■ Messungen ab 0 Hz ■ Richtungsunabhängiger Einbau Features ■ Detection from 0 Hz ■ No alignment required RHEINTACHO Messtechnik GmbH Waltershofener Str. 1 D-79111 Freiburg

Open the catalog to page 1

Technisches Datenblatt ■ Technical Data Sheet ABGEKUNDIGT / DISCONTINUED Typenubersicht ■ Type Overview Typ Type Lieferumfang Sensor, 2 Kontermuttern Scope of supply Sensor, 2 fixing nuts Einbau ■ Mounting Schalt- / Einbauabstand Air gap 3,5 mm @ 1KHz;M4 Basis: Evolventenverzahnung 3.5 mm @ 1KHz;M4 basis: involute gear Einbauart Mounting principle Einschraubgewinde, richtungsunabhangig DIN type thread, no special alignment required Anzugsmoment Tightening torque Biegeradius Anschlusskabel Bending radius of connection cable Gehausewerkstoff Housing material Messing Brass MaRzeichnungen Installation...

Open the catalog to page 2

Technisches Datenblatt ■ Technical Data Sheet ABGEKÜNDIGT / DISCONTINUED Elektrische Daten ■ Electrical Specification Prinzipschaltbild Circuit diagram Versorgung Power supply Stromaufnahme Current consumption Anschlussschaltbild Electrical connection Frequenzbereich Frequency range Max. Ausgangsstrom Maximum output current Ausgang Output Ausgangssignalpegel Output signal level Kurzschlussfest Short circuit immunity Gegen alle Leiter against all terminals Verpolungsschutz Reverse polarity protection Gegen alle Leiter against all terminals Berechnung der maximalen Last Calculation of maximum load...

Open the catalog to page 3

Technisches Datenblatt ■ Technical Data Sheet

Open the catalog to page 4

Technisches Datenblatt ■ Technical Data Sheet ABGEKÜNDIGT / DISCONTINUED Zeichnungen ■ Drawings Zeichnung ■ Drawing Brown……..+8..36VDC Black………signal Blue……….ground shield Brown……..+8 .. 36VDC Black………signal Blue……….ground shield

Open the catalog to page 5

Technisches Datenblatt ■ Technical Data Sheet ABGEKÜNDIGT / DISCONTINUED Typ: SHN11.GK13.SC A: Signal B: Ground C: +8…36VDC Technische Änderungen, auch ohne vorherige Ankündigung, We reserve the right to make technical changes without prior vorbehalten. Trotz größter Sorgfalt können wir bei Fehlern keine notice. Although great care has been taken in compiling this document, we accept no liability for errors or omissions. Haftung übernehmen.

Open the catalog to page 6

All RHEINTACHO Messtechnik GmbH catalogs and technical brochures

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list