1. Catalogs
  2. Rf-t
  3. SC+ Circular Fire Damper Cartrige

SC+ Circular Fire Damper Cartrige

SC+ Circular Fire Damper Cartrige

SC+ Circular Fire Damper Cartrige

Product catalog summary
Product Presentation
Circular fire damper cartridges SC(V)+ are designed to prevent fire propagation through ventilation ducts. They offer fire resistance up to 120 minutes and are equipped with a fusible link mechanism. There are three types: SC+, SCV+, and SC(V)0, each suited for different installation scenarios. They are tested according to EN 1366-2 and are easy to install, maintenance-free, and suitable for interior applications.

Fire Classification and Approvals
The dampers are classified according to EN 13501-3:2005 and tested under EN 1366-2 standards. They have various classifications based on installation type and fire resistance duration (EI 60, EI 90, EI 120). Approvals are based on tests by official institutes, with certifications including ISO 9001 and compliance with EN 15650:2010.

Dimensions and Options
The dampers come in sizes Ø100mm to Ø200mm. An optional end of range switch can be installed to monitor damper position remotely. Proper storage and handling are crucial to avoid damage and ensure functionality.

Installation and Operation
Installation guidelines emphasize avoiding damage and ensuring proper sealing. The dampers are designed for easy installation in various wall and floor types. They are maintenance-free and have been tested for operational reliability and durability.

Technical Data
The dampers operate at a maximum power supply of 250V and consumption of 6A, with an IP65 protection rating. They are designed to withstand specific pressure conditions and have been tested for response time and cycling reliability.

Declaration of Conformity
RF-Technologies NV declares that the SC+ and SC0 dampers comply with EN 15650:2010 and other relevant European directives, ensuring their reliability and safety in fire prevention applications.
See more

Catalog excerpts

SC+ Circular Fire Damper Cartrige-2

Circular Fire Damper Cartridge Tested according to the European standard EN 1366-2 at a constant pressure of 300 Pa Minimal pressure drop Suitable for mounting in rigid wall, oor and exible wall Easy to install Maintenance free For interior applications 1. Steel tunnel 2. Two semi circular blades 3. Intumescent strip around the tunnel 4. Rubber sealing rings 5. Fusible link 72°C 6. Two blocking hooks 7. End of range switch 8. Finishing ventilation valve 9. Product identication RANGE ØDn(mm)

 Open the catalog to page 2
SC+ Circular Fire Damper Cartrige-3

Circular Fire Damper Cartridge FIRE CLASSIFICATION ACCORDING TO EN 13501-3 : 2005 - FIRE TESTS ACCORDING TO EN 1366-2 ve = duct in which the circular fire damper is mounted directly in the wall Pa = pascal h0 = directly mounted in a floor / ceiling E = integrity o—»-i = fire side = side opposite fusible link I = thermal insulation i-**-o = fire can come from either direction S = smoke leakage APPROVALS AND TEST REPORTS All our circular fire damper cartridges are submitted to tests by official test institutes. Reports of these tests form the basis C G Europe : Classification according to EN 15650:2010...

 Open the catalog to page 3
SC+ Circular Fire Damper Cartrige-4

Circular Fire Damper Cartridge OPTIONS End of range switch FCU: An end of range switch can be mounted on the metal body. The purpose is to determine the position of the circular re damper cartridge from a distance. Power supply Power consumption As the circular re damper cartridge is a safety element it needs to be stored and handled with caution. Attention: • Avoid any kind of damage • Avoid contact with water • Avoid deformation of the casing during the installation and sealing • to unload in a dry area • to avoid heavy shocks

 Open the catalog to page 4
SC+ Circular Fire Damper Cartrige-5

Circular Fire Damper Cartridge Rf- Technologies Lange Ambachtstraat 40 9860 Oosterzele Belgium DECLARATION OF CONFORMITY We, RF-Technologies NV Declare under our sole responsibility that the product: Circular re damper cartridge SC+ & SC0 To which this declaration relates, is in compliance with all the applicable essential requirements according to EN 15650:2010 , and other provisions of the European Council Directive (89/106/EEC) SC+ / SC0 Circular re damper cartridge Fire resistance according to EN 1366-2 and classications according to EN 13501-3: Rigid wall With mortar With mortar Flexible...

 Open the catalog to page 5
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.