Smoke evacuation shutter. Rf-Technologies nv  Lange Ambachtstraat 40  9860 Oosterzele  Belgium  Tel +32 9 362 31 71  Fax +32 9 362 33 07  [email protected]

Product presentation AVANTAGE 5 Range and dimensions AVANTAGE 1V 6 Range and dimensions AVANTAGE 2V 7 Range and dimensions AVANTAGE 1V ME 8 Options - at the time of order 9 Shock absorbers for the doors 14 Installation into vertical concrete shaft with mounting frame 15 Installation into vertical concrete shaft without mounting frame 17 Installation into vertical shaft with built-in mounting frame: general instructions for all types of shafts (other than concrete) 18 Installation into vertical shaft (without a mounting frame): general instructions for all types of shafts (other than concrete)...

Wn = nominal width Hn = nominal height Sn = free air passage E = integrity I = thermal insulation S = smoke leakage 60/120 = fire resistance time Pa = pascal o -> i = meets the criteria from the outside (o) to the inside (i) i <-> o = fire side not important AA = automatic activation multi = multi compartment 1500 = pressure level 3 (1500Pa) ved = vertical duct hod = horizontal duct vew = vertical wall penetration V = volt W = watt V AC = Volt alternating current V DC = Volt direct current E.TELE = power supply magnet E.ALIM = power supply motor Auto = automatic Tele = remote controlled Pnom...

6. Declared performance according to EN 12101-8:2011 Type of installation: shaft-mounted 0/180°. Minimal in-between distances authorised. Range 300x385 mm ≤ Avantage 1V ≤ 700x1075 mm; 350x385 mm ≤ Avantage 2V ≤ 1100x1105 mm; 350x385 mm ≤ Avantage 1V ME ≤ 700x1075 mm Installation Classification 1 EI 60 (ved i n o) S 1500 AA multi (fire resistance according to EN 1366-10, classification according to EN 13501-4) 5. Harmonised standard / European Assessment Document; notified body / European Technical Assessment, Technical Assessment Body, notified body; certificate of constancy of performance: Shaft...

Product presentation AVANTAGE Product presentation AVANTAGE The smoke evacuation shutter Avantage is noted for its superior airtight properties. The shutter is available as single (1V) and double (2V) shutter units; it is also available in a motorised version (Avantage ME) that allows the remote resetting of the blade. Developed in accordance with the European product standard EN 12101-8 and tested with front grill according to the EN 1366-10 standard, Avantage offers a fire-resistance of 60 or 120 minutes (see the classification overview), and ensures minimum pressure loss. Smoke evacuation...

Avantage smoke evacuation shutter, single (1V) shutter unit. ■ 1 shutter ■ fire resistance till 60 minutes / 120 minutes 5. blocking mechanism + automatic locking at 90° 7. front protection grill (compulsory) 2. Sealing if mounting frame 3. Mounting frame (optional) 4. Nominal dimensions shutter Wn x Hn 5. Built-in dimensions without mounting frame (Wn+10) x (Hn+10)mm 6. Built-in dimensions with mounting frame (Wn+20) x (Hn+20)mm 7. Overall (outside) dimensions of the shutter (Wn+54) x (Hn+54)mm

Variant AVANTAGE 2V60 - 2V120_ Avantage smoke evacuation shutter, double (2V) shutter unit. ■ 2 shutters ■ fire resistance till 60 minutes / 120 minutes 5. blocking mechanism + automatic locking at 90° 8. front protection grill (compulsory) 2. Sealing if mounting frame 3. Mounting frame (optional) 4. Nominal dimensions shutter Wn x Hn 5. Built-in dimensions without mounting frame (Wn+10) x (Hn+10)mm 6. Built-in dimensions with mounting frame (Wn+20) x (Hn+20)mm 7. Overall (outside) dimensions of the shutter (Wn+54) x (Hn+54)mm

Motorised (ME) Avantage 1V smoke evacuation shutter that allows the remote resetting of the blade. ■ with resetting motor ■ 1 shutter ■ fire resistance till 60 minutes / 120 minutes 5. blocking mechanism + automatic locking at 90° 8. front protection grill (compulsory) 2. Sealing if mounting frame 3. Mounting frame (optional) 4. Nominal dimensions shutter Wn x Hn 5. Built-in dimensions without mounting frame (Wn+10) x (Hn+10)mm 6. Built-in dimensions with mounting frame (Wn+20) x (Hn+20)mm 7. Overall (outside) dimensions of the shutter (Wn+54) x (Hn+54)mm

Evolution - kits Evolution - kits KITS VD24-VA Electromagnet 24 V DC (not applicable for ME model) Electromagnet 48 V DC (not applicable for ME model) KITS FDC-VA Limit switches 'open/closed' KITS ME-AVANM Mounting frame (delivered separately) Technical front protection grill (aluminium frame and perforated plate, fastened with screws 4.8x19mm), free air passage of 69,4% Options - at the time of order Technical front protection grill (aluminium frame and perforated plate, fastened with screws 4.8x19mm), free air passage of 69,4%

Storage and handling Storage and handling As this product is a safety element, it should be stored and handled with care. Avoid: • any kind of impact or damage • contact with water • deformation of the casing It is recommended: • to unload in a dry area • not to flip or roll the product to move it • not to use the damper as a scaffold, working table, etc. • not to store smaller dampers inside larger ones Installation General points ∎  ∎  ∎  ∎  ∎  ∎  The installation must comply with the installation manual and the classification report. The installation of the shaft must comply with the classification...

Installation Operation: closing 1 1. Resetting 1V Manual: Turn the key 20° clock wise and withdraw it. Push the blocking mechanism. Close the shutter by pulling the metal profile. 2. Resetting 2V Manual: Press on both blocking devices to deactivate them. 3. Turn the key 20° clock wise and withdraw it. Close both shutters together by pulling on the metal profiles. Make sure that the shutters hook in each other as illustrated. 4. Resetting ME Manual: Turn the key 20° clock wise and withdraw it. Push the blocking mechanism. Close the shutter by pulling the metal profile. Remote: Power the actuator...