PNEUMATIC LIFTING TABLE FOR UPHOLSTERY ST-3/KPO The table ST-3/KPO is equipped with swivel carpet-covered tabletop, steel sliding rails with and spring brake system blocks the tabletop after each 90 degrees. The hydraulic anti-bouncing brake system that helps to prevent the table from bouncing. The table has a Height Positioning System: when one presses a pedal, the table starts to move, making a 2 seconds pause at a certain point of movement. The height of this pause can be adjusted on a special bar placed under the table. This solution allows upholsterer to work at a comfortable height and eliminates the need of time-consuming adjustments of the height of the table. - This solid construction is based on steel profiles and pneumatic cylinder. - The pneumatic cylinder is foot-controlled. - The table has a connection slot for pneumatic tools. - After turning the table off it blocks automatically (cutting power off does not make the table fold). - The table can be equipped with a drawer for upholstery tools. - It has been proven that using our lifting tables decrease the use of energy by 15% in comparison to upholstery trestles. - An increase in productivity of at least 14% has been observed when employees used our lifting tables instead of regular upholstery trestles. Pneumatic cylinder: D125x600 Minimum height: 430 mm (16.9”)

Powered by TCPDF (www.tcpdf.org)