Catalogs >
REXEL >
PNEUMATIC LIFTING TABLE FOR UPHOLSTERY ST-3/KP

PNEUMATIC LIFTING TABLE FOR UPHOLSTERY ST-3/KP
1Pages

Catalog excerpts

PNEUMATIC LIFTING TABLE FOR UPHOLSTERY ST-3/KP - 1

PNEUMATIC LIFTING TABLE FOR UPHOLSTERY ST-3/KP The table is equipped with a carpet-covered tabletop with sliding rails and a hydraulic anti-bouncing brake system that helps to prevent the table from bouncing. The table has a Height Positioning System: when one presses a pedal, the table starts to move, making a 2 seconds pause at a certain point of movement. The height of this pause can be adjusted on a special bar placed under the table. This solution allows upholsterer to work at a comfortable height and eliminates the need of time-consuming adjustments of the height of the table. Key features: - This solid construction is based on steel profiles and pneumatic cylinder. - The pneumatic cylinder is foot-controlled. - The table has a connection slot for pneumatic tools. - After turning the table off it blocks automatically (cutting power off does not make the table fold). - The table can be equipped with a drawer for upholstery tools. - It has been proven that using our lifting tables decrease the use of energy by 15% in comparison to upholstery trestles. - An increase in productivity of at least 14% has been observed when employees used our lifting tables instead of regular upholstery trestles. Specifications: Model: ST-3/KP Working pressure: 6 bar (87 PSI) Tabletop dimensions: 2000 mm x 900 mm (78.74" x 35.43") Pneumatic cylinder: D125x600 Minimum height: 320 mm (12.59") Maximum height: 1280 mm (50.39") Maximum load: 160 kg (352.74 lbs) Powered by TCPDF (www.tcpdf.org)

Open the catalog to page 1

PNEUMATIC LIFTING TABLE FOR UPHOLSTERY ST-3/KP 1Pages

Catalog excerpts

All REXEL catalogs and technical brochures

PNEUMATIC LIFTING TABLE FOR UPHOLSTERY ST-3/KP
1Pages