- Cutting room table SK-3 with UL-3 spreading head designed for manual fabric spreading and preparing cutting packages for vertical or round knives cutting. - The machine is equipped with: cutting room table SK-3, spreading head UL-3, fabric end clamp LD-2, fabric end cutter OT-1/A and mechanical cut counter. - Spreading head with tray for textile pile spreading (optional). - Turnable spreading head (optional). - Power cable on wire rope (optional). - Table with air-cushion (optional UL-3/AIR). - Standard lengths are: 2.8 m, 3.9 m, 5 m, 6.1 m, 7.2 m, 8.3 m, 9.4 m, 10.5 m, 11.6 m, 12.7 m, 13.8 m, 14.9 m, and 16 m (6.56 ft, 9.84 ft, 16.4 ft, 19.68 ft, 22.96 ft, 26.24 ft, 29.52 ft, 32.8 ft, 36.08 ft, 39.37 ft, 42.65 ft, 45.93 ft, and 52.49 ft). Note: UL-3 spreading head takes 80 cm of SK-3 table. - Standard roll weight: up to 60 kg - Standard roll diameter: up to 50 cm Options for additional payment: - Spreading head with cradle / shelf to spread fabric from a bundle and de-creasing roller UL-3/KZ. - Spreading head with de-creasing roller UL-3/Z. - Turnable spreading head UL-3/O (not compatible with UL-3/KZ). - Turnable spreading head + de-creasing roller UL-3/OZ (not compatible with UL-3/KZ). - Fabric end cutter wire extension system. - Bottom shelf for roll storage, shelf thickness 18 mm, finished with white PCV. - Additional rod for thin cardboard cores ¥ inch. - Air-blowing: each 2,5 m section.

Powered by TCPDF (www.tcpdf.org)