RevPi Flat S Technical Data Item No.: 100371 Housing type DIN rail housing for TH35 according to DIN EN 60715 Housing material Approx. 256 g (incl. connectors) Protection class Power supply Maximum power consumption Approved operating temperature Approved storage temperature 4 x RJ45 10/100 Ethernet, two or four separate MAC addresses for LAN0/switch or LAN0 ... LAN3; LAN0: 1 x Ethernet; LAN1: 3 x Ethernet switched or single (DSA) 2 x USB A (total current draw from all sockets max. 1 A) 1 x Micro-USB (solely for image transfer to eMMC) 2 x RS485 (RJ14 socket and 3-pole plug) max. 500 kbps, galvanically isolated, termination switchable by software 1 x RP-SMA socket WLAN Clock rate Processor cooling Passive with heat sink Flash memory Number of digital outputs Output type Potential-free relay contact Maximum current output channel Number of analog inputs Analog input type 0 ... 10 V DC or 0 ... 20 mA, single-ended, 16 bit at piControl, 21 bit raw value Number of analog outputs Errors and omissions excepted. KUNBUS GmbH, Heerweg 15C, 73770 Denkendorf, Germany | Tel: +49 (0) 711 400 91 500 | Fax: +49 (0) 711 400 91 501 Email: [email protected] | Web: https://revolutionpi.com

RevPi Flat S Analog output type 0 ... 10 V DC, short-circuit proof, protection against backfeeding (max. +Ub = 28,8 V), 12 bit resolution, gain error 3 % of measured value, offset error +/-50 mV Maximum current load of the analog output Software connection of inputs and outputs Via GPIOs and process image According to EN 61000-6-2 A shielded cable is required for the analog I/Os for cable lengths over 3 m. Optical display 6 status LEDs (bi-color), 5 of them freely programmable Errors and omissions excepted. KUNBUS GmbH, Heerweg 15C, 73770 Denkendorf, Germany | Tel: +49 (0) 711 400 91 500 | Fax:...