TECHNICAL DATASHEET Validation date: 25/11/2020 Conveyor belt TPU Polyurethane CLEAR Complies with EU regulations for conveying foodstuff DS/DEC Round finger overlapped splice 60 Top cover thickness: 0,60 mm HR "Rice grain" positive pattern L 140N/mm fabric, rigid in weft MAIN TECHNICAL DATA Top cover: Hardness 92 ShA [HR] "Rice grain" pattern Total thickness: 2,30 mm ± 0,1 mm per ply Manufacturing width: 2 000 mm Product temperature: -40°C to +90°C Ambient temperature: -25°C to +60°C Type of support: Slider bed -Coefficient of friction (on steel slider bed): 0,20 ± 20% MECHANICAL STRENGTHS Tolerances: -10% +20% Tensile force for 1% elongation (k1%): 12 N/mm Maximum working tension: 20 N/mm PRESS SETTINGS These recommendations may vary according to the equipment and press heating system. Top heating platen (± 10°C): 170°C Bottom heating platen (± 10°C): 155°C Welding Time (± 1 min): 0 min Pressure (± 0,5 bar) : 2,0 bar Reveyron does not recommend using foil for splicing. FASTENERS / LACING AZ7 (plastic zip) - Minibelt-A (steel, rivet) - Minibelt-I (inox, rivet) -Securi-P2 (inox, flat wires) - Securi-P3 (inox, flat wires) - SL02 (inox, self-lock) - BELT FABRICATION This belt material can be fitted with : V-guides / Profiles / Cleats / Corrugated sidewalls / Working conditions: - from 0°C to +8°C: add +50% on min. pulley diameter - from -25°C to 0°C: add +100% on min. pulley diameter The minimum pulley diameter is not related to the diameter needed to achieve a friction drive. These data may change. The client remains liable for the proper choice of the belt material. Reveyron cannot be held responsible for any damage caused by improper use of the belt material. REVEYRON SAS 247 route du Mas Rillier - Les Echets - 01700 MIRIBEL - FRANCE Light Conveyor Belts & Belt Bend Conveyors Tel: +33 4 78 91 08 51 www.reveyron.com [email protected] VAT FR54 769 201 187 art 286 ter du CGI - Capital 1 000 000 € - Siret 769 201 187 00010 - NAF 1396Z