Quantum360™

Product catalog summary

Overview: The Quantum 360™ TMR Rotary Position Sensors by Reventec utilize advanced TMR technology for precise rotational sensing. These sensors are designed to measure through non-ferrous materials and function effectively in off-axis target magnet installations, offering unique advantages over other rotary sensing technologies.

Key Features:

Solid-state, continuous rotational sensing with off-axis measurement capabilities and exceptional gap tolerance.
12-bit resolution providing less than 0.1° resolution.
Configurable without loss of resolution, capable of measuring through non-ferrous materials up to 25mm away.
Available in single or dual redundant channel options with multiple magnet configurations.
Submersible with IP67 environmental protection.

Technical Specifications:

Sensing range: 0-359° with an accuracy of ±0.4% of full scale.
Permissible airgap: Up to 25mm depending on application/target magnet.
Measurement rate: 5kHz.
Supply voltage: +6VDC to +31VDC or +5VDC ±0.25VDC.
Typical operating current: <25mA with overvoltage and reverse polarity protection.
Output: Analogue voltage of 0-5VDC or 0-10VDC (10VDC output only available on 6-31VDC supply).
Operating temperature: -40°C to 125°C.

Mechanical and Electrical Details:

Housing material: Anodised aluminium.
Wire type: 5 core, FEP insulated, 24 AWG with a 1-meter flying lead as standard.
Wire colors: Red (Supply +), Black (Ground), Yellow (Analogue Signal 1), Orange (Analogue Signal 2), White (Tx Comms), Green (Rx Comms).
Communication: RS-232 via FTDI USB cable, with GUI available on request.

Ordering Information: The product code is structured as Q360-XX-XXX-XX-X, with options for single or dual channel variants, power supply, output options, and magnet configurations.

Contact Information: Reventec Ltd, Downton Business Centre, Downton, Salisbury, Wiltshire, SP5 3HU, UK. Tel: +44 (0)1725 510321, Email: [email protected], Web: www.reventec.com.

Catalog excerpts

Quantum 360™ TMR Rotary Position Sensors The Quantum 360™ uses the latest in advanced TMR position sensor technology from Reventec. Capable of measuring through large sections of non-ferrous materials and operating in off-axis target magnet installations, this product provides advantages unavailable from alternative rotary sensing technologies. Solid-state, continuous rotational sensing Off axis measurement, with exceptional gap tolerance Fully configurable without resolution loss Rotary measurement through non-ferrous materials up to 25mm away. Dual redundant option Multiple magnet (target) options.

Open the catalog to page 1

Quantum 360 TMR Rotary Position Sensor ft reventec Order Number Configurator Sample Code: Q360-01-631-A1-M (Single Channel, 6-31VDC supply, 0-5VDC output signal, Supplied with Magnet Only) Position Measurement Sensing Range Environmental protection Mechanicals/Cable Spec Supply Voltage Flying Leads Configuration Interface Dual Redundant Signal Output 2 Specifications may be subject to change without prior notice Product Code: Q360-XX-XXX-XX-X | Document: Q360-DS-01 | Version 1.1 Tel: +44 (0)1725 510321 Email: [email protected] Web: www.reventec.com Reventec Ltd Downton Business Centre, Downton...

Open the catalog to page 2

All Reventec Ltd catalogs and technical brochures

CE-050-02
2 Pages
LS Range
3 Pages
Quantum100™
2 Pages