Quantum100™

Quantum100™

Quantum100™

Product catalog summary
Overview: The Quantum100™ is a robust, lightweight linear TMR position sensor with a 100mm measurement range, designed for accurate position measurement in harsh environments. It is suitable for motorsport applications such as hydraulic piston travel, suspension monitoring, steering, and throttle position sensing. The sensor provides outputs via digital CAN or analogue voltage.
Specifications:
  • Measurement Type: Angular and Linear Displacement
  • Accuracy: ±0.5% of measurement
  • Measurement Rate: 5kHz
  • Measurement Range: ±50mm linear
  • Supply Voltage: +6VDC to +40VDC
  • Operating Current: <12mA at +12VDC
  • Overvoltage Protection: +45 VDC continuous
  • Reverse Polarity Protection: -45 VDC continuous
Analogue Output:
  • Type: Voltage
  • Voltage Output Range: 0-5V or 0-10V
  • Output Calibration: +0.5V to +4.5V (Fully Configurable)
  • Resolution: 12 bit
  • Temperature Stability: ±0.1% over full temperature range
Environmental and Mechanical:
  • Protection: IP67
  • Vibration: 10Hz to 2000Hz sine sweep @10G (24hrs per each axis)
  • Shock: 50G half sine wave for 11ms, 10 times each axis
  • Operating Temperature: -40°C to +150°C (Remote Sensing Head), -40°C to +125°C (Processing Electronics)
Wiring and Configuration:
  • Wire Colour and Pin Out: Red (Supply), Black (Ground), Yellow (Signal), White (Tx Comms), Green (Rx Comms)
  • Connector Options: Flying lead, Deutsch ASL 5 Way Connector, Deutsch ASX 5 Way Connector, Custom
  • Construction Material: Anodised Aluminium, Stainless-Steel, Titanium, PEEK
  • Mass: From 15g
CAN Output:
  • Type: CAN 2.0A
  • Baud Rate: 500kbit/sec or 1MegB/s
  • Message Output Rate: 1kHz, 100Hz or 10Hz
Accessories: USB calibration cable P/N: 07-003-01
Contact Information: Reventec Ltd, Downton Business Centre, Downton, Salisbury, Wiltshire, SP5 3HU, UK. Tel: +44 (0)1725 557203, Email: [email protected], Web: www.reventec.com
See more

Catalog excerpts

Quantum100™-1

Quantum100™ 100mm Linear TMR Position Sensors The Quantum100™ sensor is a robust, lightweight linear position sensor with a 100mm measurement range. The non-contact TMR sensor provides extremely accurate position measurement in harsh environmental applications. Standard motorsport measurement applications include: hydraulic piston travel, suspension component monitoring, steering position and throttle position sensing. The sensor outputs its measurement via a digital CAN output or analogue voltage output. Sensor Dimensions Typical Target Dimensions Mechanical Configuratio

 Open the catalog to page 1
Quantum100™-2

Quantum100™- 100mm Linear TMR Position Sensors Supply Voltage Customer Specific Specifications may be subject to change without prior notice Product Code: Q100 | Document: Quantum100-GEN- | Version 1 Tel: +44 (0)1725 557203 Email: [email protected] Web: www.reventec.com Reventec Ltd Downton Business Centre, Downton Salisbury, Wiltshire, SP5 3HU, UK Registered in England and Wales, #08561556 ©2014 Reventec Ltd

 Open the catalog to page 2

All Reventec Ltd catalogs and technical brochures

  1. CE-050-02

    2  Pages

  2. LS Range

    3  Pages

  3. Quantum360™

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.