LS Range

LS Range

LS Range

Product catalog summary
Overview: The LS Range Liquid Level Sensors by Reventec Ltd are designed for measuring liquid levels with high precision and reliability. They offer both analog and CAN outputs, suitable for various applications involving different fluids.
Specifications:
  • Sensor Output: Configurable 0-5VDC, standard 0.25V-4.75V. CAN protocol with 11-bit identifier, 2.0A current, and configurable base ID.
  • Electrical: Operates on +6VDC to 30VDC, with a nominal current of <20mA at 12VDC. Includes reverse polarity protection and a serial interface with 5V CMOS logic levels.
  • Mechanical Details: Probe lengths range from 80mm to 700mm, with various mounting options including SAE and AN-8 threaded. Sealing options include radial O-ring and Dowty seal.
  • Environmental: Operating temperature ranges from -40°C to +125°C, with an optional range up to +150°C. IP67 ingress protection and pressure ratings of 2 bar, with an optional 10 bar.
Calibration and Compatibility:
  • Supports up to 10-point calibration across temperature for both volatile and non-volatile liquids.
  • Compatible with common fuels, oils, coolants, water, and blends. Specific fluid compatibility should be confirmed with Reventec engineers.
Output and Error Conditions:
  • Analog: Output resolution of 10-bit, sample rate of 100Hz, with accuracy of ±1% full scale at 20°C, and an optional ±0.5%.
  • CAN: Transmit only, fixed 1.0 Mbps baud rate, configurable transmit rate and ID. No termination resistor included.
  • Error conditions for external temperature sensor include codes for not enabled, open circuit, and short circuit failures.
Wiring and Interface:
  • Wire colors and pinout details provided for analog, low-level alarm, and CAN configurations.
  • CAN bus interface transmits liquid level, internal, and external temperatures as unsigned 16-bit integers.
Contact Information: Reventec Ltd, Downton Business Centre, Downton, Salisbury, Wiltshire, SP5 3HU, UK. Tel: +44 (0)1725 510321, Email: [email protected], Web: www.reventec.com
See more

Catalog excerpts

LS Range-1

Liquid Level Sensors

 Open the catalog to page 1
LS Range-3

-40°C to +150°C (option) Ingress Protection IP67 Wire Colour • Red • Black • White • Green • Blue • Purple Analogue 0-5V Power (6-30VDC) Ground Analogue Output 0-5V Tx Comms Rx Comms Analogue & Low Level Alarm Power (6-30VDC) Ground Analogue Output 0-5V Tx Comms Rx Comms Low Level Alarm CAN & Analogue 0-5V Power (6-30VDC) Ground Analogue Output 0-5V Tx Comms Rx Comms CAN High CAN Low CAN Protocol The specification of the CAN bus interface is: • 2.0A • Transmit only • Transmit rate (packets/sec) and ID are configurable • Fixed 1.0 Mbps baud rate • Standard (11 bit) identifier only • No termination...

 Open the catalog to page 3

All Reventec Ltd catalogs and technical brochures

  1. CE-050-02

    2  Pages

  2. Quantum360™

    2  Pages

  3. Quantum100™

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.