*mydirectindustry

R03-30/40

Product catalog summary

Technical Offer Overview
The R03 Automatic Tool Changer (ATC) is designed as an optional accessory for RET10X, RET10P, and RET100B horizontal milling and boring machines. It facilitates automatic tool changes into the machine spindle and can be either attached to the machine or anchored to the floor.

Main Features

Automatic tool change with a semiautomatic or manual magazine filling.
Two versions available: R03-30 and R03-40, with 30 and 40 tool capacities respectively.
Tool change time is 15 seconds for both versions.
Maximum tool diameter is 125 mm unrestricted, 200 mm with free pockets.
Maximum tool length is 500 mm for R03-30 and 480 mm for R03-40.
Maximum tool weight is 15 kg, with total magazine weight limits of 250 kg for R03-30 and 300 kg for R03-40.
Operating air pressure required is 5 bar with air purity of 40 microns.

Technical Description

Consists of a magazine and a changer, with integrated air adjustment.
Partially covered device with all pneumatic components from FESTO.

Control and Operation

Controlled via the machine control panel in operating mode and a secondary panel on the ATC in service mode.

Magazine Details

Stable welded frame with a rotary-mounted light alloy wheel.
Steel tool pockets with pneumatic release and radial tool storage.

Changer Details

Pneumatic clamping jaws with locking and electric motor-driven rotation.
Linear guidance and motor-driven travel towards the spindle.

Compliance and Accessories

CE compliant for the European Union, integrated into the machine's safety system.
Includes technical documentation and an operating manual.

Catalog excerpts

Technical offer – R03 – Automatic tool changer R03-30/40 FEATURES Automatic tool changer (ATC) R03 is designed for RET10X, RET10P, RET100B horizontal milling and boring machines as an optional technological accessory. R03 provides changing tools into the machine spindle. The device is firmly connected to the machine (RET10P) or it is firmly anchored to the floor in the working machine area (RET10X, RET100B). A tool change is fully automatic. The magazine is filled semiautomatically via the spindle or manually directly into the magazine. MAIN PARAMETERS Version Tool changing time Tool pocket pitch Maximum tool diameter – unrestricted Maximum tool diameter – with free pockets Maximum tool length Maximum tool weight Maximum weight of tools in magazine – total Maximum tool unbalance in magazine wheel Maximum wheel speed Required air purity Weight without tools * For the machine RET10P is possible only version R03-30 BRIEF TECHNICAL DESCRIPTION • • • • two basic parts – magazine and changer integrated air adjustment for magazine and changer device is partially covered all pneumatic components FESTO

Open the catalog to page 1

Technical offer – R03 – Automatic tool changer via the machine control panel in operating mode via the second control panel on the ATC in service mode (adjustment and filling) stable welded frame rotary-mounted light alloy wheel with tool pockets wheel rotation drive with integrated gearbox steel tool pockets tools stored radially, perpendicular to the wheel axis tool locking in the pocket by pulling the spring over the collet pneumatic release of the tool from the pocket pneumatic clamping jaws opening / closing with locking pneumatic extension of the unit with jaws rotation of the jaws by an...

Open the catalog to page 2

R03-30/40

R03-30/40

Catalog excerpts

All RETOS VARNSDORF s.r.o. catalogs and technical brochures