MT03X – rotary table
3Pages

Technical offer – MT03X – rotary table MT03X FEATURES MT03X rotary table is an optional technological accessory for the RET10P and HP100 floor type horizontal boring and milling machines. This rotary table is used as a secondary horizontal clamping surface for workpiece clamping and angular positioning in vertical axis (B axis) and shifting in one direction (V axis) including machine feed. Positioning in both axes is driven by motor or manually. The clamping is performed on the main machine clamping surface (clamping plate) or on separate foundation. MT03X rotary table is set on a clamping plate with a lifting device and fastened via T-slots and standardized clamps manually. Anchoring to concrete foundation is performed using anchoring material similarly to the actual machine. MAIN PARAMETERS Table clamping surface Table loading capacity – 1250 x 1250 Table loading capacity – 1500 x 1500 Centering hole diameter V... longitudinal travel of table Voltage – manual version Voltage – motor drive version Table weight Basic dimensions – length Basic dimensions – width Basic dimensions – height

Technical offer – MT03X – rotary table BRIEF TECHNICAL DESCRIPTION MT03X main components are high-quality grey iron castings with reinforcement ribs for high stiffness. TRAVELLING GROUPS • • V axis – travel of saddle on bed B axis – table rotation KINEMATICS AND FEED CONTROL • • • • • motor and/or hand crank V axis – gear set + trapezoidal screw B axis – gear set + ring gear changing axes using lever on the bed switching on the motor drive with a button GROUP GUIDANCE • • V axis – guideways on bed reinforced with hardened steel plates and ground, counterways with plastic casts B axis –...

Technical offer – MT03X – rotary table OPTIONAL ACCESSORIES • • • UK500, UK1000 clamping cube UU800, UU950, UU1120, UU1450, UU1620 clamping angle plates spares kit for 3-year operation DIMENSIONAL DRAWING