MT03
3Pages

Technical offer – MT03 – rotary table MT03 FEATURES MT03 rotary table is an optional technological accessory for the RET10P and HP100 floor type horizontal boring and milling machines. This rotary table is used as a secondary horizontal clamping surface for workpiece clamping and angular positioning in vertical axis. Table positioning is performed manually. The clamping is performed on the main machine clamping surface (clamping plate). MT03 rotary table is set with a lifting device and fastened via T-slots and standardized clamps manually. MAIN PARAMETERS Table clamping surface Table loading capacity – 1250 x 1250 Table loading capacity – 1500 x 1500 Centering hole diameter Table drive ratio Table weight Basic dimensions – length Basic dimensions – width Basic dimensions – height Valid from

Technical offer – MT03 – rotary table BRIEF TECHNICAL DESCRIPTION Main components are high-quality grey iron castings with reinforcement ribs for high stiffness. TRAVELLING GROUPS • 1 nonlinear axis – B – table rotation hand crank it can be driven by using a hand drill with a driving bit gear set + ring gear GROUP GUIDANCE • guideways of the rotary table are scraped lubrication of the kinematics and the guideways is derived from the rotation of the driving shaft – pump central lubrication, connection to the lubrication system of the machine (optional) POSITION MEASUREMENT • • • PZI version...

Technical offer – MT03 – rotary table DIMENSIONAL DRAWING