Technical offer– KFU-D2/90 – Two-axis orthogonal automatic positioning milling head KFU-D2/90 FEATURES SEMPUCO KFU-D2/90 two-axis orthogonal automatic positioning milling head is designed for the RET10X, RET10P (RET100B in the machine version with ram) horizontal milling and boring machines as an optional technological accessory. SEMPUCO KFU-D2/90 milling head can be used to mill and bore in any inclined plane. Milling head is mounted on the head stock automatically. Milling head is positioned automatically. MAIN PARAMETERS Clamping taper Tool shank Tool clamping force Max. transmitted power (from nominal speed) Max. torque on the spindle (to nominal speed) Nominal speed Speed transmission from machine spindle to milling head spindle Angle range of the rotary part – C axis Angle range of the rotary part – A axis Hirth serration division for A/C axis positioning – standard/optional Precision of Hirth serration division Milling head positioning speed Max. tangential load on Hirth serration Max. feed force in the direction of the milling head spindle axis Total milling head weight

Technical offer– KFU-D2/90 – Two-axis orthogonal automatic positioning milling head BRIEF TECHNICAL DESCRIPTION Milling head consists of three compactly connected basic parts, which can be twisted against one another in order to achieve the required position of the milling head spindle. A precise and repeatable mounting of the milling head on the headstock is ensured by a joint with Hirth serration. The angle of rotation in the milling head intersection surface is set by entering the parameter into the control system. The milling head rotation is performed automatically. The milling head interior...

Technical offer– KFU-D2/90 – Two-axis orthogonal automatic positioning milling head Procedure of automatic milling head mounting on the machine: • • • Automatic pallet table travel (RET10X) or column travel (RET10P) to the AHC position Automatic headstock travel and removal of the cover plate from the headstock front Automatic headstock travel and mounting of the milling head (clamping of the milling head and connecting of the electrical/hydraulic/pneumatic lines) SEMIAUTOMATIC MILLING HEAD MOUNTING A semiautomatic milling head mounting is possible on the RET10X, RET10P and RET100B (version with...