Spray System

Spray System

Spray System

Product catalog summary
Overview
The LabRAM Spray Systems are designed to enhance the functionality of LabRAM bench scale models by adding a spray coating feature. This system integrates with the existing ResonantAcoustic® Mixing (RAM) platform to fluidize dry ingredients and coat particles using an ultrasonic nozzle without wetting them.
Key Features
  • Suitable for both intermittent and continuous operation.
  • Equipped with vacuum ports to assist in drying.
  • Operates with a peristaltic and/or syringe pump.
  • Easy to install and operate.
  • Integrates with RAM mixing technology for effective and efficient processing.
Processing Benefits
  • Improves uniformity of coating and mix quality.
  • Expands mixing capabilities to coat dry powder ingredients.
  • Coats dry/powder mix ingredients in a standard 16 fluid ounce mixing vessel.
  • Meters a constant and precise amount of atomized liquid for consistent and homogeneous coating.
Technical Specifications
  • Product Vacuum: Capable up to 26 in. Hg.
  • Acceleration: Up to 35 g.
  • Viscosity: Up to ~5,000 cP.
  • Nozzle Power: Single Phase, 110-240VAC, 15A, 50/60 Hz.
  • Frequency: 130 kHz.
  • Mean Particle Size (Water): 12 µm.
  • Flow Rates: 0—20 mL/min.
Components
  • Ultrasonic Nozzle and Controller.
  • Spray Nozzle Arm.
  • Vessel Holder Base and Standoffs.
  • Spray System Lid Assembly.
  • Vacuum Ports.
  • Pump Hose Attachment.
  • Thumb Screws.
See more

Catalog excerpts

Spray System-1

Innovative Mixing Solutions LabRAM Spray System How You Think About Mixing and Processing Designed to expand the function of LabRAM™ bench scale models, the Resodyn Spray System mounts to the resonator plate of a Lab RAM™ 1.1 lbs. (500 gm) or 2.2 lbs. (1000 gm) machine, adding a spray coating feature to LabRAM™'s capabilities. Utilizing the existing ResonantAcoustic® Mixing (RAM) platform, the bed of dry ingredients is fluidized while the Spray System's ultra-sonic nozzle creates a mist, coating particles without wetting. Lab RAM Spray System (shown without hood) LabRAM II Spray System (shown without . • Suitable for intermittent or continuous operation • Equipped with vacuum ports to assist drying • Operated with a peristaltic and / or syringe pump • Easy installation and operation • Integrates with effective and efficient RAM mixing technology • Can significantly improve uniformity of coating and mix quality • Expand the mixing capabilities of a LabRAM™ ll mixer to coat dry powder ingredients • Coats dry / powder mix ingredients in standard 16 fluid ounce mixing vessel • Meters a constant and precise amount of atomized liquid for consistent and homogenous coating The LabRAM Spray Systems Include: LabRAM™ ll spray system assembly Ultrasonic nozzle and controller PUMP OPTIONS: Peristaltic and/or syringe pump OPTIONAL: Vacuum system 130 North Main Street, Suite 630 Butte, MT USA 59701 (406) 497-5333 [email protected] www.ResodynMixers.com

 Open the catalog to page 1
Spray System-2

Innovative Mixing Solutions LabRAM Spray System How You Think About Mixing and Processing LabRAM ll Back Panel Pump Hose Attachment Nozzle Assembly Ultrasonic Nozzle Assembly Spray Nozzle Arm Thumb Screws Vacuum Ports Spray System Lid Assembly Nozzle Bottom Item Vessel and Lid Process Requirements Product Vacuum (Purchased Separately) Acceleration Viscosity Power Material Frequency Mean Particle Size (Water) Flow Rates Vessel Holder Base and Standoffs Quantity Capable up to 26 in. Hg. Up to 35 g Up to ~5,000 cP Single Phase, 110-240VAC, 15A, 50/60 Hz Power Liquid 130 kHz 12 µm 0—20 mL/min Other...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.