lexible heating jackets drums for hazardous zones
4Pages

FLEXIBLE HEATING JACKETS DRUMS FOR HAZARDOUS ZONES  Single phase up to 240V, 50/60Hz ac  Class II Appliance, Ingress Protection IP54  Hazardous Area Certification  Standards: EN 60079-0:2012, EN 60079-7:2007, EN60079-31:2009  EX II 2 G D Ex e IIC T4 Gb Ex tb IIIC T135 C Db Zone 1 and 2 Hazardous area heating jackets for 25, 50 and 100 liters gas deposits. These ATEX Zone 1 and 2 rated heating jackets are suitable for gentle warming or to prevent from freezing in winter. They are constructed with silicone coated glass cloth outer and high density fiberglass insulation. Safe operation conditions are maintained even in the presence of potentially explosive gases. Safe operating conditions are also given in explosive gas atmospheres. Transformers are not required as they are using a standard 240V AC supply. These flexible heating jackets are designed and adjustable to fit 25L, 50L and 100L deposits. They are also available in other sizes as well as for containers. A self-limiting temperature of around 40°C above the ambient temperature will be maintained on the drum wall when operated at 240V (with a 20ºC ambient temperature, the drum wall temperature will be around 60ºC). If lower temperatures are required, the heating jacket may be fitted with a thermostat (0-50ºC), allowing the user to reduce the heating jacket temperature. The thermostat must be adjusted whilst the jacket is situated within a safe area. Power consumption Heating jacket height (*)The heating jacket controls the temperature of the heaters up to maximum 40 degrees above ambient temperature Resistencias Tope,S.A·C/Josep Ros i Ros 57·Sant Andreu de la Barca· Barcelona· SPAIN· Phone:+34 932 650 246 www.resistenciastope.com · export@res

ATEX HEATING JACKETS FOR IBC DRUMS  Single phase up to 240V, 50/60Hz ac  7A/1700W  Protection IP54  Class II  Standards: EN 60079-0:2012, EN 60079-7:2003, Power consumption These heaters are suitable for a moderate heating or to prevent from freezing in winter, suitable for ATEX zones 1 and 2. Transformers are not required due to it works with standard AC power voltages. These flexible heating jackets are designed to fit 1000L tanks and for use with plastic coating and IBC metal structure. However, it can also be used to heat 4x205L drums. An insulated lid can be used to reduce heat...

ATEX HEATING JACKETS FOR GAS BOTTLES  Single phase up to 240V, 50/60Hz ac  0,5A/100W  Protection IP54  With or without thermostat  Class II  Standards: EN 60079-0:2012, EN 60079-31:2009, Power consumption (*)The heating jacket controls the temperature of the heaters up to maximum 40 degrees above ambient temperature These heaters are suitable for a moderate heating or to prevent from freezing in winter, suitable for ATEX zones 1 and 2. Transformers are not required due to it works with standard AC power voltages. These flexible heating jackets are designed to fit gas bottles and other...

DRUM HEATER UP TO 210 L Application: Heating of drums safely in ATEX areas 1 and 2. It is designed to heat up standard 205l drums. The low temperature of the system and the lack of transmission heat losses contribute to the high thermal efficiency of the induction heater. These ATEX heaters offer easy use to be easily transportable. In addition, maintenance is almost nonexistent for its steel and feature easy cleaning. For these features is ideal for use gas bottles, containers of processes for the chemical, pharmaceutical, petrochemical or paint stores. ATEX Ex II 2GD Eex e tD II 170ºC(T3)...