Drum heaters
6Pages

DRUM HEATERS Bases cast aluminum heaters allow heating for all kinds of industrial products contained in metal deposits at room temperature show an increase in viscosity which makes it very difficult to handle or transfer. On the other hand these bases are extremely resistant to chemical agents and their application is very simple because the heat transfer is by direct contact. Applications: To melt grease, paint, wax, etc. Materials: in Inox 321 plated heating element, casted in aluminum. 1.1 Heating belts for metallic drums 200l The flexible silicone belt allows more suitable heating for all kinds of industrial products contained in metal deposits at ambient temperature have an increased viscosity, making difficult its handling or transferring. Moreover, these belts are extremely resistant to aggressive chemicals. They can be assembled and disassembled with great simplicity and speed for use at the right time. Ref.M7702T Technical Specifications:  Surface load 0,87 W/cm2, 1000W 230V.  Maximum working temperature 180°C.  Thermostat 0-120º.  Output 1 meter cable.  Ø 565-580mm.  Width 110mm.  Length 1765 mm. Resistencias Tope,S.A·C/Josep Ros i Ros 57·Sant Andreu de la Barca· Barcelona· SPAIN· Phone:+34 932 650 246 www.resistenciastope.com·export@

RESISTENCIAS TOPE, S.A. 1.2 Flexible heaters for drums from 25 l. to 210 l. Application: A simple and effective solution for heating all kinds of drums in particular for plastic containers containing all kind liquids, grease or food. The belt is tightened to container closures with a very simple operation and the temperature is adjusted by a thermostat to 90 ° C. All belts are provided with their own thermal insulation to increase the thermal efficiency and increased power belts thermostats can be installed up to 120 ° C provided for metal drums. Ref. Control Temp. 1.3 Flexible heaters for...

RESISTENCIAS TOPE, S.A. 1.4 Drum heater up to 210 l Application: Heating of drums safely in ATEX areas 1 and 2. It is designed to heat up standard 205l drums. The low temperature of the system and the lack of transmission heat losses contribute to the high thermal efficiency of the induction heater. These ATEX heaters offer easy use to be easily transportable. In addition, maintenance is almost nonexistent for its steel and feature easy cleaning. For these features is ideal for use gas bottles, containers of processes for the chemical, pharmaceutical, petrochemical or paint stores. ATEX Ex...

RESISTENCIAS TOPE, S.A. 1.4 IBC drum heater Performance: The 1-circuit IBC heater (1x1300w) is ideal for antifreeze applications in winter, while the 2-circuit (2x1400w) allows heating of fluids to higher temperatures. In most applications, with 1300W it is feasible to heat a filled IBC to an average of about 1 ° C per hour. On the other hand, with 2800W it can be increased between 1 ° C and 3 ° C per hour, as long is it isolated with its insulation lid. Including top insulating cover ref. M512345811 1.6 ATEX Drum heater IBC Designed to work on plastic coating or metal structure. However it...

1.7 ATEX heating jackets for gas bottles  Single phase up to 240V, 50/60Hz ac  0,5A/100W  Protection IP54  With or without thermostat  Class II  Standards: EN 60079-0:2012, EN 60079-31:2009, Power consumption (*)The heating jacket controls the temperature of the heaters up to maximum 40 degrees above ambient temperature These heaters are suitable for a moderate heating or to prevent from freezing in winter, suitable for ATEX zones 1 and 2. Transformers are not required due to it works with standard AC power voltages. These flexible heating jackets are designed to fit gas bottles and...

insulation cover (top and side) PVC waterproof cover for IBC tanks PVC waterproof cover for 200l tanks Resistencias Tope,S.A·C/Josep Ros i Ros 57·Sant Andreu de la Barca· Barcelona· SPAIN· Phone:+34 932 650 246 www.resistenciastope.com·export@resistenciastope.