T9PBE - Cartridge Heater Circular Flange Ending T9PBE

Product catalog summary

Overview: The document provides detailed specifications and options for cartridge heaters, focusing on high, medium, and low-density variants. It highlights the reliability and premium quality of these heaters, suitable for various industrial applications.

Specifications:

Certified according to UL standards.
Available with isolated or non-isolated thermocouples (type “J” and “K”) as per customer requirements.
Ground lead and IP67 rating for protection against wet and dusty environments.
Diameter tolerance H7: +0 / -0.02 / -0.06mm.
Sheath material: Stainless steel 1.4541.
Heating conductor material: NiCr 8020.
Maximum sheath temperature: 750 ºC / 1380 ºF.
Maximum voltage: 480 V.
Wattage tolerance: +5% -10%.
High voltage resistance: 1500 V AC at > 24 V operation voltage, 500 V at <= 24 V operation voltage.
Insulation resistance: > 5 MΩ at 500 V DC.
Leakage current: <= 0.5 mA at 253 V AC.
Length tolerance: A 1.5%, min A 1mm.
Standard diameter tolerance metric: -0.02 / -0.06 mm; inch: -0.003 -0.008.

Options:

Various endings and protections available.
Urgent service options with specific minimum order quantities (MOQ) and delivery times: 24 hours (MOQ 4 pieces, max 25 pieces), 48 hours (MOQ 4 pieces, max 50 pieces), 3/5 days (MOQ 2 pieces, max 150 pieces), 7/8 days (MOQ 2 pieces).

Special Features:

Circular flange and special cartridge heaters for smelting non-ferrous metals.
Maxiwatt high-density cartridges are specifically designed for this purpose.

Technical Key:

Tested at environmental temperature with specific diameter and length tolerances.
Various diameter options available in both metric and inch measurements.

Ending 90º:

Compressed cartridge heaters with a 90º ending, reference "T9".
Fully watertight and reinforced, suitable for hostile environments with high temperatures and waste materials.

Catalog excerpts

T9PBE - Cartridge Heater Circular Flange Ending T9PBE-1

Circular Flange Ending T9PBE Cartridge HeatersReliable Premium Quality. High Density % Medium Density • Low Density # Ending 90°: Compressed cartridge heaters. ending 90° Ref. "T9" Fully watertight and reinforced cartridge. Ready for removal from its accommodation. With reinforcement which prevents deformation in case of displacement of the same. The ending Ref. T9 can be used in any hostile situation (high temperature, waste material). TESTED AT ENVIRONMENTAL TEMPERATURE -Certified according to UL standards. -Watt distribution: -Isolated or non isolated thermocouples type "J" and "K", placed as costumer's requirements. -Ground lead. -IP67: For extremely environments (wetness and dust) -Different endings and protections. -Diameter tolerance H7: +0 / -0.02 / -0.06mm Urgent service. Ordered by 10:00 a.m. CET / CEST, following urgent services are available: - 24 hours: MOQ 4 pieces and maximum 25 pieces. - 48 hours: MOQ 4 piece and maximum 50 pieces. - 3/5 days: MOQ 2 pieces and maximum 150 pieces. - 7/8 days: MOQ 2 pieces.

Open the catalog to page 1