T9PB - Cartridge Heater Circular Flange Ending T9PB

Product catalog summary

Overview: The document provides technical specifications and options for cartridge heaters, specifically the T9PB model, known for its reliable premium quality and varying density options (high, medium, low).

Specifications:

Certified according to UL standards.
Watt distribution options available.
Thermocouples type “J” and “K” can be isolated or non-isolated as per customer requirements.
Ground lead and IP67 protection for extreme environments.
Diameter tolerance H7: +0 / -0.02 / -0.06mm.

Urgent Service Options:

24 hours: Minimum order quantity (MOQ) 4 pieces, maximum 25 pieces.
48 hours: MOQ 4 pieces, maximum 50 pieces.
3/5 days: MOQ 2 pieces, maximum 150 pieces.
7/8 days: MOQ 2 pieces.

Special Features:

Circular flange and special cartridge heaters for smelting non-ferrous metals.
Stock of Maxiwatt high-density cartridges for specific applications.

Technical Specifications:

Sheath material: Stainless steel 1.4541.
Heating conductor material: NiCr 8020.
Maximum sheath temperature: 750 ºC / 1380 ºF.
Maximum voltage: 480 V.
Wattage tolerance: +5% -10%.
High voltage resistance: 1500 V AC at > 24 V operation voltage, 500 V at <= 24 V operation voltage.
Insulation resistance: > 5 MΩ at 500 V DC.
Leakage current: <= 0.5 mA at 253 V AC.
Length tolerance: A 1.5%, min A 1mm.
Standard diameter tolerance metric: -0.02 / -0.06 mm, inch: -0.003 -0.008.

Dimensional Data:

Various diameter and length options available in both metric and inch measurements.
Ending 90º: Compressed cartridge heaters with watertight and reinforced design for hostile environments.

Catalog excerpts

T9PB - Cartridge Heater Circular Flange Ending T9PB-1

Cartridge Heaters Reliable Premium Quality. High Density % Medium Density • Low Density # Circular Flange Ending T9PB I? T WELDED Ending 90°: Compressed cartridge heaters. ending 90° Ref. "T9" Fully watertight and reinforced cartridge. Ready for removal from its accommodation. With reinforcement which prevents deformation in case of displacement of the same. The ending Ref. T9 can be used in any hostile situation (high temperature, waste material). Inches A 0 Diameter (in)_1/£_5/16"_ZI8T_VT_5/ TESTED AT ENVIRONMENTAL TEMPERATURE -Certified according to UL standards. -Watt distribution: -Isolated or non isolated thermocouples type "J" and "K", placed as costumer's requirements. -Ground lead. -IP67: For extremely environments (wetness and dust) -Different endings and protections. -Diameter tolerance H7: +0 / -0.02 / -0.06mm Urgent service. Ordered by 10:00 a.m. CET / CEST, following urgent services are available: - 24 hours: MOQ 4 pieces and maximum 25 pieces. - 48 hours: MOQ 4 piece and maximum 50 pieces. - 3/5 days: MOQ 2 pieces and maximum 150 pieces. - 7/8 days: MOQ 2 pieces.

Open the catalog to page 1