T9CA - Cartridge Heater Circular Flange Ending T9CA

Product catalog summary

Overview: The document provides detailed specifications and options for cartridge heaters, focusing on their reliability and premium quality. It categorizes the heaters into high, medium, and low-density types and outlines various customization options.

Specifications:

Certified according to UL standards.
Available with isolated or non-isolated thermocouples (type “J” and “K”) as per customer requirements.
Ground lead and IP67 rating for protection against wet and dusty environments.
Diameter tolerance of H7: +0 / -0.02 / -0.06mm.

Urgent Service Options: Orders placed by 10:00 a.m. CET/CEST can be expedited with the following options:

24 hours: Minimum order quantity (MOQ) of 4 pieces, maximum 25 pieces.
48 hours: MOQ of 4 pieces, maximum 50 pieces.
3/5 days: MOQ of 2 pieces, maximum 150 pieces.
7/8 days: MOQ of 2 pieces.

Special Features:

Circular flange and special cartridge heaters for smelting non-ferrous metals.
Stock of Maxiwatt high-density cartridges for specific applications.

Technical Specifications:

Sheath material: Stainless steel 1.4541.
Heating conductor material: NiCr 8020.
Maximum sheath temperature: 750 ºC / 1380 ºF.
Maximum voltage: 480 V.
Wattage tolerance: +5% -10%.
High voltage resistance: 1500 V AC at > 24 V operation voltage, 500 V at <= 24 V operation voltage.
Insulation resistance: > 5 MΩ at 500 V DC.
Leakage current: <= 0.5 mA at 253 V AC.
Length tolerance: A 1.5%, min A 1mm.
Standard diameter tolerance metric: -0.02 / -0.06 mm, inch: -0.003 -0.008.

Dimensional Data: The document provides detailed dimensional data for various components, including diameter, length, and other critical measurements in both metric and imperial units.

Additional Features:

Ending 90º: Compressed cartridge heaters with watertight and reinforced design, suitable for hostile environments.

Catalog excerpts

T9CA - Cartridge Heater Circular Flange Ending T9CA-1

Circular Flange Ending T9CA Reliable Premium Quality. High Density % Medium Density • Low Density # WELDED Ending 90°: Compressed cartridge heaters. ending 90° Ref. "T9" Fully watertight and reinforced cartridge. Ready for removal from its accommodation. With reinforcement which prevents deformation in case of displacement of the same. The ending Ref. T9 can be used in any hostile situation (high temperature, waste material). Special cartridge heaters. smelting of non-ferrus metals. Ref: T9 Stock. Stock of Maxiwatt high density cartridges, especially for smelting of non-ferrous metals. Technical Key Sheath material TESTED AT ENVIRONMENTAL TEMPERATURE -Certified according to UL standards. -Watt distribution: -Isolated or non isolated thermocouples type "J" and "K" placed as costumer's requirements. -Ground lead. -IP67: For extremely environments (wetness and dust) -Different endings and protections. -Diameter tolerance H7: +0 / -0.02 / -0.06mm Urgent service. Ordered by 10:00 a.m. CET / CEST, following urgent services are available: - 24 hours: MOQ 4 pieces and maximum 25 pieces. - 48 hours: MOQ 4 piece and maximum 50 pieces. - 3/5 days: MOQ 2 pieces and maximum 150 pieces. - 7/8 days: MOQ 2 pieces.

Open the catalog to page 1