T9B - Cartridge Heater Circular Flange Ending T9B

Product catalog summary

Overview: The document provides technical specifications and options for Cartridge Heaters, specifically the T9B model, known for its reliable premium quality and varying density options (high, medium, low).

Specifications:

Certified according to UL standards.
Watt distribution options available.
Thermocouples type “J” and “K” can be isolated or non-isolated as per customer requirements.
Ground lead and IP67 protection for extreme environments (wetness and dust).
Diameter tolerance H7: +0 / -0.02 / -0.06mm.

Urgent Service Options:

24 hours: Minimum order quantity (MOQ) 4 pieces, maximum 25 pieces.
48 hours: MOQ 4 pieces, maximum 50 pieces.
3/5 days: MOQ 2 pieces, maximum 150 pieces.
7/8 days: MOQ 2 pieces.

Technical Specifications:

Sheath material: Stainless steel 1.4541.
Heating conductor material: NiCr 8020.
Maximum sheath temperature: 750 ºC / 1380 ºF.
Maximum voltage: 480 V.
Wattage tolerance: +5% -10%.
High voltage resistance: 1500 V AC at > 24 V operation voltage, 500 V at <= 24 V operation voltage.
Insulation resistance: > 5 MΩ at 500 V DC.
Leakage current: <= 0.5 mA at 253 V AC.
Length tolerance: A 1.5%, min A 1mm.
Standard diameter tolerance: Metric -0.02 / -0.06 mm, Inch: -0.003 -0.008.

Dimensional Details:

Diameter and length specifications are provided in both metric and inch measurements.
Special cartridge heaters are available for smelting non-ferrous metals.

Special Features:

Ending 90º: Compressed cartridge heaters with watertight and reinforced design, suitable for hostile environments.

Catalog excerpts

T9B - Cartridge Heater Circular Flange Ending T9B-1

Circular Flange Ending T9B Reliable Premium Quality. High Density Medium Density Low Density o in Special cartridge heaters. smelting of non-ferrus metals. Ref: T9 Stock. Stock of Maxiwatt high density cartridges, especially for smelting of non-ferrous metals. TESTED AT ENVIRONMENTAL TEMPERATURE Options: -Certified according to UL standards. -Watt distribution: -Isolated or non isolated thermocouples type "J" and "K", placed as costumer's requirements. -Ground lead. -IP67: For extremely environments (wetness and dust) -Different endings and protections. -Diameter tolerance H7: +0 / -0.02 / -0.06mm Urgent service. Ordered by 10:00 a.m. CET / CEST, following urgent services are available: - 24 hours: MOQ 4 pieces and maximum 25 pieces. - 48 hours: MOQ 4 piece and maximum 50 pieces. - 3/5 days: MOQ 2 pieces and maximum 150 pieces. - 7/8 days: MOQ 2 pieces.

Open the catalog to page 1