SenSpot™ Wireless MID-Resolution 2D Inclination/Tilt Ultra-Low Power Precision Sensing & Wireless Communication Bridge health monitoring Monitoring of bridge bearing and expansion joints General structural integrity monitoring (buildings, dams, etc.) Automation technology Aerospace engineering Monitoring of manufacturing process Tunnel monitoring Long lifetime: (battery life of 10 years) Wireless communication: No wiring is required for data collection Lightweight: 180 g (6.3 oz.) Easy mounting: Flange-mount or adhesive tape Adjustable sampling interval: From 18sec to 10min Long communication range: 1.0Km (0.62miles) free space 2D-Measurement: Monitoring the tilt of the whole surface instead of just one direction Operating range: ± 15⁰ Resolution: 0.01 degrees Repeatability: ≤0.01⁰ Time constant: ≤0.01sec Working temperature: -40°C to +65°C (-40°F to +150°F) Dimension: 140mm (5.5”) x 60mm (2.38″) x 32.5mm x (1.28”) Ingress Protection: IP65, weatherproof Protected against rain, snow, and UV exposure Power source: replaceable lith

Description SenSpot™ provides an easy to install, scalable solution for distributed structural integrity monitoring. SenSpot™ inclination/tilt uses Resensys’s proprietary technology for reliable and accurate measurement, largescale sensing, wireless synchronization, and ultra-energy efficient wireless communication. SenSpot™ is designed to operate maintenance-free for more than a decade. After installation, SenSpot™ does not need calibration, battery replacement, or any other maintenance for at least 10 years. Due to small size and lightweight, SenSpot™ sensors can be applied easily to as many...

Direction Diagram Figure 2: X, Y, Z, pitch & roll orientations Email: [email protected]

The data shown in SenScope™ Figure 3: Tilt measurements for a MRT gauge Email: [email protected]