MUKI LHP is an electro-hydraulic rig for long hole drilling, it has tilt, rotation and pendulum arm, perform precise and smooth movements for parallel holding. Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (14 kW). Full 360°, horizontal coverage with parallel holding is 1.44 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm. Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling. Applications: • Sub Level Caving, benching • Sub Level Stoping • VCR and cable bolting

Muki LHP Technical specifications Hydraulic Clamp RE 2500 Series Hydraulic motor and chain 400 mm Bull 121 4 ft rods 3, 5 ft rods DRIFTER • Model • Percussion power • Percussion pressure • Frequency percussion • Rotation speed • Rotation torque • Hole diameter • Lub. air consumption (a 3 bar) • Lub. oil consumption • Water consumption • Shank adapter • Weight • Length with shank FEED • Model • Advance drilling • Feed extension • Hydraulic clamp • Standard feed • Options • Two stinger to stabilize while drilling • Digital inclinometer for measuring angles CARRIER • Model • Diesel engine • Power •...

Muki LHP Technical specifications Muki LHP Technical specifications PENDULUM ARM • Angle tilt • Feed roll-over • Hydraulic cylinders ELECTRIC SYSTEM • Electric motor • Voltages • Frecuency • Starting method • Option to 1000 VAC • Overload protection and ground fault • Percussion hour meter • Phase sequence indicator • Battery charger • Electric transformer • Working lights • Electric cable reel • Electric cable • Protection degree WATER AND AIR SYSTEM • Compressor • Maximum capacity • Working pressure • Water pump with hydraulic motor • Maximum capacity • Minimum inlet pressure • Bowman cooler...

Muki LHP Technical specifications Total Weight COVERAGE AREA TURN RADIO Rev. 160916 ©Copyright 2016 RESEMIN. Specifications and equipment are subject to change without further notice.