MUKI LHBP

Product catalog summary

Overview: The MUKI LHBP is an electro-hydraulic rig designed for long hole drilling in small sections. It features a hydraulic boom (3AP model) with parallel holding, and is equipped with a Montabert HC 50 drifter. The rig offers full 360° horizontal coverage and can drill up to 15 meters with diameters up to 74 mm.

Specifications:

Drifter: Montabert HC50 with 14 kW power, 130 Bar percussion pressure, and 62 Hz frequency. It supports hole diameters of 33-64 mm and uses R32 Female - T38 Male shank adapters.
Feed: RE 2500 Series with hydraulic motor and chain, featuring a 400 mm feed extension and hydraulic clamp.
Carrier: C22.1 model with a Deutz BF4L2011 diesel engine, 55.1 kW power, and articulated 4WD chassis.
Boom: 3AP-R model with 700 mm extension, +45°/-20° angle lift, and 360° swing angle.
Hydraulic Control System: Includes direct control valve, percussion pump, and rotation pump with a working pressure of 180 bar.
Water and Air System: Features a compressor with a maximum capacity of 5.1 l/s and a Grundfoss water pump with a capacity of 6.9 m3/h.
Electric System: Powered by an ABB 55kW electric motor, supporting voltages from 380 to 1000 VAC, with overload protection and a phase sequence indicator.

Applications: Suitable for sub-level caving, benching, sub-level stoping, VCR, and cable bolting.

Key Features:

Automatic parallelism for efficient boom positioning.
Digital inclinometer with only two transducers for enhanced accuracy.
Centralized lubrication and automatic fire suppression systems for safety and maintenance.

Dimensions and Weight: The total weight of the rig is 7,380 Kg.

Catalog excerpts

MUKI LHBP is an electro-hydraulic rig for long hole drilling, it has an hydraulic boom, 3AP model, with parallel holding. Long hole drilling feed 2500 series with 2 Stingers and hydraulic clamp. Equipped with Montabert drifter HC 50 (14 kW). Full 360°, horizontal coverage with parallel holding is 2.45 m; maximum length of drilling up to 15 m, diameters up to 74 mm bit, Reamer 127 mm. Chassis for heavy duty application, articulated 4WD, self-propelled with diesel, electro hydraulic system for drilling. Applications: • Sub Level Caving, benching • Sub Level Stoping • VCR and cable bolting

Open the catalog to page 1

Muki LHBP Technical specifications Hydraulic clamp RE 2500 Series Hydraulic motor and chain 400 mm Bull 121 4 ft rods 3, 5 ft rods DRIFTER • Model • Percussion power • Percussion pressure • Frequency percussion • Rotation speed • Rotation torque • Hole diameter • Lub. air consumption (to 3 bar) • Lub. oil consumption • Water consumption • Shank adapter • Weight • Length with shank FEED • Model • Advance drilling • Feed extension • Hydraulic clamp • Standard feed • Options • Two stinger to stabilize while drilling • Digital inclinometer for measuring angles CARRIER • Model • Diesel engine • Power •...

Open the catalog to page 2

Muki LHBP Technical specifications BOOM • Model • Automatic parallelism • Boom extension • Angle lift • Swing angle • Feed roll-over • Hydraulic cylinders WATER AND AIR SYSTEM • Compressor • Maximum capacity • Working pressure • Water pump with hydraulic motor • Maximum capacity • Minimum inlet pressure • Bowman cooler ELECTRIC SYSTEM • Electric motor • Voltages • Frecuency • Starting method • Option to 1000 VAC • Overload protection and ground fault • Percussion hour meter • Phase sequence indicator • Battery charger • Electric transformer • Working lights • Electric cable reel • Electric cable •...

Open the catalog to page 3

Open the catalog to page 4

MUKI LHBP

MUKI LHBP

Catalog excerpts

All Resemin catalogs and technical brochures