*mydirectindustry

MUKI FF

Product catalog summary

Overview: The MUKI FF is a front face drilling rig designed for narrow vein tunneling in underground mining. It is electro-hydraulic and measures 1.05 meters in width, suitable for small sections ranging from 1.5 x 2.0 to 3.5 x 3.5 meters. It features an upper drill option for the Cut & Fill method.

Specifications:

Drifter: Montabert HC50 with 14 kW percussion power, 130 Bar pressure, and 62 Hz frequency. It supports a rotation speed of 0 - 195 rpm and a torque of 415 Nm. The hole diameter ranges from 33 to 64 mm.
Feed: Options include telescopic feeds (8-10, 6-10, 6-8 feet) and simple feeds (8, 10 feet).
Boom: Model 2.1 with a 1000 mm extension, angle lift of +45° / -20°, and a swing angle of ±30°.
Electric System: Powered by an ABB 55kW motor with voltage options from 380 to 1000 VAC and frequency of 50-60 Hz. It includes overload protection and a phase sequence indicator.
Hydraulic Control System: Features direct control valve, percussion pump, and rotation pump with a working pressure of 180 bar.
Carrier: Equipped with a Deutz BF4L2011 diesel engine, 55.1 kW power, hydrostatic transmission, and articulated steering. It includes service and emergency brakes, and a centralized lubrication system.
Water and Air System: Includes a compressor with a maximum capacity of 5.1 l/s and a water pump with a hydraulic motor.

Dimensions: The total weight of the MUKI FF with telescopic feed 8-10 is 7,380 Kg.

Catalog excerpts

Front face jumbo for narrow veins Front face drilling rig, electro-hydraulic, of 1.05 m width for tunneling in underground mining for small sections from 1.5 x 2.0 up to 3.5 x 3.5 m. Upper Drill option, for Cut & Fill method on sections from 1.5 m width at the bottom. It comes with hydraulic boom of square section and feed with options for working with: Telescopic feed 8-10, 6-10 y 6-8 feet. Another option is Simple feed with options for working with drill rods 8 and 10 feet lengths. Equipped with Montabert drifter HC 50 (14 kW). Chassis for heavy duty application, articulated 4WD, self-propelled diesel Deutz engine and Poclain hydrostatic transmission, electrohydraulic system for drilling.

Open the catalog to page 1

Muki FF Technical specifications Cable Reel • Swing angle ± 30° • Hydraulic cylinders Parker DRIFTER • Model • Percussion power • Percussion pressure • Frequency percussion • Rotation speed • Rotation torque • Hole diameter • Lub air consumption • Lub oil consumption • Water consumption • Shank adapter • Weight • Length with shank FEED • Model • Advance drilling • Telescopic feed 8-10 • Options Telescopic feed 6-10 Telescopic feed 8-10 Simple feed 8 Simple feed 10 RE 2500 Series Hydraulic motor and chain 8-10 ft rods 6-10 ft rods 6-8 ft rods 8 ft rods 10 ft rods ELECTRIC SYSTEM • Electric...

Open the catalog to page 2

Muki FF Technical specifications Muki FF Technical specifications CARRIER • Model • Diesel engine • Power • Exhaust catalyst • Transmission • Hydrostactic pump • Positioning pump • Rear axle oscillating • Service brakes • Emergency and parking brakes • Tyres • Steering (articulated carrier) • Hydraulic jacks • Battery • Electric system • Gradeability • Tramming speed • Canopy • Tramming lights • Centralized lubrication system • Drilling lubrication system • Automatic fire suppression system • Fire extinguisher • High-pressure washing system • Reel grease gun WATER AND AIR SYSTEM • Compressor •...

Open the catalog to page 3

Technical specifications DIMENSIONS (Muki FF with Telescopic Feed 8-10) TURN RADIO COVERAGE AREA 7,380 Kg. ©Copyright 2016 RESEMIN. Specifications and equipment are subject to change without further notice. Total Weight

Open the catalog to page 4

MUKI FF

MUKI FF

Catalog excerpts

All Resemin catalogs and technical brochures