The cutting table comprises a precision-built steel construction embodying linear direct-drive motors on each of the two main axes. To achieve the required precision, the bridge and selfpropelled carriage plate are powered by two direct-drive linear motors on each side. This results in a speed range from 1 to 30.000 mm/min. Use of these components and construction enables the installation to achieve positioning accuracy and repetition accuracy of ± 50µm (at 20 °C) across the machine’s full range. The guideways and drives are suitably protected from water and abrasive through bellows and protective stainless steel plating. UNMANNED PRODUCTION Due to automatic control of the PJ high pressure pump and the process parameters, permanent supervision during the cutting process is not required. Resato water jets are equipped with an automated stop function that trips once a cutting task is completed. This means that all units will be acting in standby mode or will shut down and almost no energy is required. KEY FEATURES 1 Better cutting behavior 2 Improved absolute repetition accuracy 3 Greatly reduced wear parts consumption 4 Cutting speed can be rapidly changed KEY SPECIFICATIONS 1 Maximum speed : 30.000 mm/min ORDERING CODE See second page 2 Maximum acceleration : 500 mm/s 3 Weight capacity cutting bed : 1000 kg per

ACM CUTTING TABLE ACM TABLE RANGE Net cutting range Machine type Ordering code Different machine types or more cutting heads than two can be provided on special request TECHNICAL SPECIFICATIONS SPECIFICATIONS Repetition accuracy Positioning accuracy Maximum stroke Z-axis Minimum speed Maximum product height Working range between 2 cutting head pens ¹ Across the entire table range ² Applicable only to the ACM 3000 series Resato International BV Duitslandlaan 1 Please note that general data and specifications given in this brochure are subject to change without notice. Feel free to contact our...