2D CUTTING HEAD CONFIGURATION RPN 1046488 The 2D cutting head has a long-life mixing chamber and only two wear parts: the water nozzle and the abrasive mixing tube. The cutting table’s bridge has 1 or 2* cutting heads, each mounted on a carriage plate. The carriage plates are provided with direct-drive linear motors, enabling fast and easy setting of the correct distance between both cutting heads from the operator console. This distance varies from 350 mm to 1500 mm. The ACM 3000-series machines also have a special feature: While using 2 cutting heads, the effective cutting range for 1 head remains 3000 mm in a 2D-cutting position. ELECTRONIC FEEDER To optimize cutting speed and quality each cutting head is connected to an electronic abrasive dosing system (feeder) located on each cutting head’s carriage and containing a small integrated buffer to ensure reliable, consistent and continuously variable abrasive addition. KEY FEATURES 1 Abrasive and pure water compatible 2 Modular design 3 Highly accurate 4 Compact solution KEY SPECIFICATIONS ORDERING CODE RPN 1048094 1 Maximum working pressure : 4000 bar 2 Pneumatic valve, normally closed 3 Water nozzle : 0.25 mm 4 Abrasive mixing tube : 0.8 m

2D CUTTING HEAD CONFIGURATION RPN 1046488 TECHNICAL SPECIFICATIONS CONNECTIONS Cutting head open Cutting head & height sensor vent Height sensor down Height sensor cable external MECHANICAL Clamping positioning repeatability Calibration height Distance to Z-axis mounting face Length of height sensor arm Resato International BV 1e Energieweg 13 Please note that general data and specifications given in this brochure are subject to change without notice. Feel free to contact our sales department if you need more definite informa