EPUBLIC MANUFACTURING CENTRIFUGAL BLOWER Republic offers a complete line of centrifugal blowers for vacuum or compressed air applications. Centrifugal blowers provide dry, clean, oil-free air and require low energy consumption. Unlike compressed air systems, this series is safe to run at low pressure, and allows for increased production speeds or levels. Pulley Size in Inches The RB2400 provides the flow capacities of two blowers in one. The blower comes with ceramic hybrid bearings, 360 degree rotatable outlet discharge, easy to remove stainless steel bearing housing assembly, and zinc plated steel motor RB2400/10-50 HP pulley. ulley Size n Inches Standard cubic feet per minute, air at 14.7 PSIA, 68° F, 36% R.H. 1” H20 = 0.074” Hg = 0.036 PSIG = 0.57 oz = 25.4 mm H2O PulleyInches in Size in Inches Pulley Size in Inches ©Republic Manufacturing PulleyInches in Size in Inches Pulley Size in Inches Standard cubic feet per minute, air at 14.7 PSIA, 68° F, 36% R.H. 1” H20 = 0.074” Hg = 0.036 PSIG = 0.57 oz = 25.4 mm H2O ulley Size n Inches Standard cubic feet per minute, air at 14.7 PSIA, 68° F, 36% R.H. 1” H20 = 0.074” Hg = 0.036 PSIG = 0.57 oz = 25.4 mm H2O RB2400-30 HP RB2400-40 90 224 (in. H2O/mbar) RB2400-25 HP with Enclosure/without Enclosure HP (lb/kg) 199 Retro Kit Weight (lb/kg) X 1000 76/189 Pulley Size in Inches Standard cubic feet per minute, air at 14.7 PSIA, 68° F, 36% R.H. 1” H20 = 0.074” Hg = 0.036 PSIG = 0.57 oz = 25.4 mm H2

Available Options Republic Centrifugal Blowers are made to order, and can be customized to fit almost any application. Many common options and accessories are listed below. For additional options, please contact Republic or your local distributor. • Hard anodized bearing housing assembly • Inlet and outlet flanges available • Water-cooled blower available Accessories • Enclosures for noise control • Exhaust silencer • Starter panel • Variable frequency drive Advantages 25-50 Horsepower - up to 19,700 rpm Ceramic hybrid bearings Multi-lip seals on both ends of the shaft Easy to remove bearing/impeller...