EPUBLIC MANUFACTURING CENTRIFUGAL BLOWER Republic offers a complete line of centrifugal blowers for vacuum or compressed air applications. Centrifugal blowers provide dry, clean, oil-free air and require low energy consumption. Unlike compressed air systems, this series is safe to run at low pressure, and allows for increased production speeds or levels. RB1200HC/5-25 HP 50Hz with ceramic hybrid bearings, 360 degree rotatable outlet discharge, easy to remove The RB1200HC is the most versitile of the centrifugal blower series. The blower comes stainless steel bearing housing assembly, and zinc plated steel motor pulley. Pulley Size in Inches Pulley Size in Inches Standard cubic feet per minute, air at 14.7 PSIA, 68° F, 36% R.H. 1” H20 = 0.074” Hg = 0.036 PSIG = 0.57 oz = 25.4 mm H2O RB1200HC-10 HP Pulley Size m3/hr 3 in Inches Pulley Size in Inches Pulley Size in Inches ©Republic Manufacturing Pulley Size in Inches Pulley Size in Inches Pulley Size in Inches Pulley Size 108/270 in Inches 700 500 300 82/96 440/200 Standard cubic feet per minute, air at 14.7 PSIA, 68° F, 36% R.H. 1” H20 = 0.074” Hg = 0.036 PSIG = 0.57 oz = 25.4 mm H2O

Available Options Republic Centrifugal Blowers are made to order, and can be customized to fit almost any application. Many common options and accessories are listed below. For additional options, please contact Republic or your local distributor. • Hard anodized bearing housing assembly • Inlet and outlet flanges • Water-cooled blower Accessories • Enclosures for noise control • Exhaust silencer • Starter panel • Variable frequency drive • 16 Groove belt for long life • Most versatile blower • Ceramic hybrid bearings • Multi-lip seals on both ends of the shaft • Easy to remove bearing/impeller...