*mydirectindustry

Catalogs
REPUBLIC LAGUN
HORIZONTAL UNIVERSAL MILLING MACHINES

HORIZONTAL UNIVERSAL MILLING MACHINES

Product catalog summary

Overview: The document provides detailed specifications and features of various models of horizontal universal milling machines, including FU Horizontal, FUTV Horizontal/Vertical Combination, FCM Independent Power Over Arm, and FTHV Combination with Variable Speed. It outlines standard equipment, optional accessories, and technical specifications for each model.

Standard Equipment: Each model comes equipped with a universal table swivel of +/- 45 degrees, an automatic central lubrication system, a low voltage electrical system with push button control, a complete coolant system, a chip and coolant tray, one milling arbor, two arbor supports, a backlash eliminator on table travel, a variable speed spindle, and electronic variable feeds in 3-axis with rapid. All ways are hardened and ground.

Model-Specific Features:

FU-125-E: Universal horizontal milling machine with optional vertical heads. It includes a universal head and multi-angle universal milling head.
FUTV-125-E / FUTV-152-E: These models feature a turret milling head with built-in quill feed and a self-motorized head. The main motor is 4 HP with variable speed options.
FCM-152-E: Features a power over ram spindle with variable speed and automatic variable feed in ram travel.
FTHV-3: Combination horizontal/vertical milling machine with variable speed on both spindles. It includes cross axis with dovetail V-guides and square ways, pendant controls, and a centralized lubrication system.

Technical Specifications: The document provides detailed measurements and specifications for each model, including spindle taper, quill diameter, speed ranges, motor power, and traverse dimensions. It also includes information on the weight and maximum table load capacity.

Optional Accessories: The document lists optional accessories such as universal dividing heads, gear hobbing attachments, precision rotary tables, rack milling attachments, universal vises, slotting attachments, digital readout systems, and long milling arbors.

Additional Information: The document notes that images are for illustration purposes and may show optional features not included with the model. Specifications are subject to change without notice, and weights and measurements are approximate.

Catalog excerpts

Machine Tool Co. H igher Standards for Demanding Applications. |

Open the catalog to page 1

FU-125-E UNIVERSAL HORIZONTAL MILLING MACHINE STANDARD EQUIPAIENT: FU-125-E Universal table swivel +/- 45 Deg. Օ Automatic central lube system. Low voltage electrical system with push button control. Օ Complete coolant system. Chip and coolant tray. Օ One milling arbor. Two arbor supports. Օ Back lash eliminator on table travel. Variable speed spindle. Օ Instruction manual, service tools, test report. Electronic variable feeds in 3-axis with rapid. Օ All ways hardened and ground. DIFFERENT STYLES OF VERTICAL HEADS AVAILABLE AS AN OPTION UNIVERSAL HEAD / MULTI ANGL Mounted On the End of...

Open the catalog to page 2

FUTV-125-E / 152-E UNIVERSAL HORIZONTAL MILLING MACHINE WITH TURRET MILLING HEAD (STANDARD) STANDARD EQUIPMENT: FUTV-125-E / FUTV-152-E Universal table swivel +/- 45 Deg. Օ Automatic central lube system. Low voltage electrical system with push button control. Օ Complete coolant system. Chip and coolant tray. Օ One milling arbor. Two arbor supports. Օ Back lash eliminator on table travel. Variable speed spindle. Օ Instruction manual, service tools, test report. Electronic variable feeds in 3-axis with rapid. Օ Self-motorized head. All ways hardened and ground. Օ Hand wheel on saddle for...

Open the catalog to page 3

FU-152-E UNIVERSAL HORIZONTAL MILLING MACHINE STANDARD EQUIPAIENT: FU-152-E / FCM-152-E r ■ Universal table swivel +/- 45 Deg. Օ Automatic central lube system. Low voltage electrical system with push button control. Օ Complete coolant system. Chip and coolant tray. Օ One milling arbor. Two arbor supports (FCM-152-E Only). Օ Back lash eliminator on table travel. Variable speed spindle. Օ Instruction manual, service tools, test report. Electronic variable feeds in 3-axis with rapid. Օ All ways hardened and ground. Hand wheel on saddle for table travel. MULTI ANGLE UNIVERSAL MILLING HEAD...

Open the catalog to page 4

FCM-152-E UNIVERSAL HORIZONTAL MILLING MACHINE WITH POWER OVER ARM SPINDLE ADDITIONAL FEATURES: FCM-152-E Power over ram spindle with variable speed spindle. Օ Automatic variable feed in ram travel. (STANDARD) MULTI ANGLE UNIVERSAL MILLING HEAD A D Shown with optional milling head MOD. A B C D E F G H I J min. max. min. max. min. max. min. max. min. max. i min. max. FCM-152-E 5" 26 1/2" 5 7/8" 24 5/8" 511/16" 913/16" 27 9/16" 3 1/8" 5 1/8" 6 1/2" 25 3/16" 5 7/8" 27 9/16" 5 1/8" 16 3/4" 35 7/16" 125 675 150 625 145 250 700 80 130 165 640 150 700 130 425 900 (OPTIONAL) MULTI ANGLE UNIVERSAL MILLING...

Open the catalog to page 5

FTHV-3 Combination Horizontal / Vertical Milling Machine with Variable Speed On Vertical and Horizontal Spindles STANDARD EQUIPAIENT: FTHV-3 Cross Axis with Dovetail V-guides and square ways (15 3/4" wide) and outboard knee support. Օ Pendant controls direct on line starter w/low voltage controls in NEMA type enclosure. Centralized lubrication system of saddle, table and vertical guides and all screws and nuts. Օ Flood coolant system and base chip pan. Two arbors supports and one milling arbor, 1" diameter. Օ Draw bar for horizontal & Vertical spindles. Operation manual, spare parts list...

Open the catalog to page 6

SPECIFICATIONS FU-125-E FUTV-125-E FU-152-E FUTV-152-E FCMU-152-E TABLE Working Surface 49 1/4" x 11" (1250 x 280mm) 60" x 12 3/4" (1525 x 325mm) 60" x 12 3/4" (1525 x 325mm) Number of T Slots 3" x 5/8" (3 x 16mm) 3" x 5/8" (3 x 16mm) 3" x 5/8" (3 x 16mm) Distance Between T Slots 2 1/2" (63mm) 3 1/8" (80mm) 3 1/8" (80mm) Table Swivel +/- 45° +/- 45° +/- 45° TRAVERSE Automatic Longitudinal 33 1/2" (851mm) 41 3/8" (1050mm) 41 3/8" (1050mm) Automatic Cross 12" (290mm) 13" (330mm) 13" (330mm) Automatic Vertical 18 3/4" (475mm) 18 3/4" (475mm) 18 3/4" (475mm) Distance From Spindle to Overarm 5 3/4"...

Open the catalog to page 7

HORIZONTAL UNIVERSAL MILLING MACHINES Optional Accessories Universal Dividing Head 6"- 8"- 10" Օ Attachment for Gear Hobbing Precision Rotary Table O 10"- O 12. գ Rack Milling Attachment Օ Universal Vise KURT or TYPE B-50 Slotting Attachment 5" Օ Digital Readout Systems (DRO) Long Milling Arbor 6"- 8"- 10" Distributed By: 800 Sprucelake Drive Harbor City, CA 90710 Օ EMAIL [email protected] (310) 518-1100 (800) 421-2105 Օ FAX (310) 830-0923 www.lagun.com descriptions, spթcifications and illustrations are subject to change without notice. republic lagun is not responsible for misprints or typographical...

Open the catalog to page 8

Archived catalogs

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list