_POWER SERIES_ FAMILY OF HEAVY DUTY ENGINE LATHES

AMERICAN TURNMASTER POWER ONE & POWER FIVE SERIES Outstanding Features • One piece (monolithic) bed, floor type casting • Three bedway design with extra way supporting the apron • All ways are hardened and ground • Forged steel spindle with opposed taper roller bearings (6” Bore) • Hardened and ground gears, shafts, cross slide ways and screw • Electromagnetic spindle brake POWER  ONE  SERIES Swing Over Bed Swing Over Cross Slide Distance Between Centers Spindle Type Spindle Bore Spindle Speed - Standard Main Motor POWER  FIVE  SERIES Swing Over Bed Swing Over Cross Slide Distance Between Centers...

AMERICAN TURNMASTER POWER ONE & POWER FIVE SERIES OPTIONAL ACCESSORIES AVAILABLE FOR ALL MODELS HEADSTOCK & SPINDLE 18 Step Spindle Speed ONE PIECE FLOOR TYPE BED CAST TOOL GRINDER Standard Accessories Available in a variety of wheel diameters Power One & Power Five Models • Square tool post on T-slotted compound • Thread chasing dial • 2 speed tailstock • Drive plate • Hardened and ground bedways with gap • Pressurized one shot lube system for cross slide and carriage • Coolant pump ALORIS & DORIAN QUICK CHANGE TOOLPOST Factory Options Power One & Power Five Models • Spindle bores up to 25”...

AMERICAN TURNMASTER POWER SIX & POWER SEVEN SERIES Outstanding Features • Massive one piece floor type bed and base (no pedestals) for maximum rigidity and vibration absorption • Highest quality Meehanite G-50 castings • 4 shear bed with dual way center guide plus front lateral way for carriage support under heavy cutting • Automatic lubrication throughout • Massive power tailstock with built-in rotary (live) center; Movement of body on bedways and quill travel controlled by hydraulics POWER  SIX  SERIES Swing Over Bed Swing Over Cross Slide Distance Between Centers Spindle Type Spindle Bore...

AMERICAN TURNMASTER POWER SIX & POWER SEVEN SERIES OPTIONAL ACCESSORIES AVAILABLE FOR ALL MODELS OPTIONAL SPINDLE BORES UP TO 25” 4 SHEAR BED WITH FRONT LATERAL WAY For carriage support under heavy cutting Standard Accessories Power Six & Power Seven Models • Square tool post on T-slotted compound • Thread chasing dial • Power tailstock • Drive plate • Hardened and ground bedways • Pressurized one shot lube system for cross slide and carriage • Coolant pump DRO’S AND GLASS SCALES This operator friendly readout system reduces setup time and increases productivity. • Tool offsets for easy compensation...

POWER SERIES CONSTRUCTION AND CAPACITIES 2 “Vee” ways & 2 flat ways plus front lateral way for carriage support 2 “Vee” ways plus front lateral way for carriage support Hollow Spindle Data SPINDLE NOSE & BORE POWER FIVE POWER SEVEN 18 ~ 1000 STANDARD STANDARD STANDARD 16 ~ 700 OPTIONAL OPTIONAL OPTIONAL STANDARD 13 ~ 600 OPTIONAL OPTIONAL OPTIONAL OPTIONAL 12 ~ 400 OPTIONAL OPTIONAL OPTIONAL OPTIONAL 10 ~ 350 - OPTIONAL OPTIONAL OPTIONAL 8 ~ 300 - OPTIONAL OPTIONAL OPTIONAL 6 ~ 250 - OPTIONAL OPTIONAL OPTIONAL 4 ~ 220 - OPTIONAL OPTIONAL OPTIONAL *Standard RPMs listed - RPM values dependent on...

POWER SERIES CONSTRUCTION AND CAPACITIES Work Piece Capacities STANDARD Power One Series Power Five Series Power Six Series Power Seven Series WITH BUILT IN CENTER Calculated Dynamic Loading Factors MAX LOAD BEARING LIFE 1,000 Hours 2,000 Hours 4,000 Hours 8,000 Hours 16,000 Hours 32,000 Hours Swing Over Bed POWER ONE SERIES Swing Over Cross Slide POWER FIVE SERIES POWER SEVEN SERIES

AMERICAN TURNMASTER POWER SERIES SPECIFICATIONS Power One & Power Five Specifications SERIES MODEL POWER FIVE SERIES CAPACITY Center Height Swing Over Bed Swing Over Cross Slide Swing Over Gap Gap Width From Headstock Distance Between Centers BED Bed Width Across Ways Bed Width with Carriage Support Way HEADSTOCK Spindle Nose - Standard / Optional Spindle Bore - Standard / Optional Spindle Speed - Number of Steps Spindle Speed - Standard Bore CARRIAGE Cross Slide Travel Compound Rest Travel THREADS & FEEDS Longitudinal Feeds - in/rev. (mm/rev.) Cross Feeds - in/rev. (mm/rev.) Longitudinal Rapid...

AMERICAN TURNMASTER POWER SERIES SPECIFICATIONS Power Six & Power Seven Specifications SERIES MODEL POWER SEVEN SERIES CAPACITY Center Height Swing Over Bed Swing Over Cross Slide Swing Over Gap Gap Width From Headstock Distance Between Centers BED Bed Width Across Ways Bed Width with Carriage Support Way HEADSTOCK Spindle Nose - Standard / Optional Spindle Bore - Standard / Optional Spindle Speed - Number of Steps Spindle Speed - Standard Bore CARRIAGE Cross Slide Travel Compound Rest Travel THREADS & FEEDS Longitudinal Feeds - in/rev. (mm/rev.) Cross Feeds - in/rev. (mm/rev.) Longitudinal Rapid...

AMERICAN TURNMASTER POWER SERIES DIMENSIONS Power One Series CENTER DISTANCE MACHINE LENGTH - Refer to Chart (On Right) Power Five Series 37” (940mm) MACHINE LENGTH - Refer to Chart (On Right) 51” (1296mm) MACHINE LENGTH - Refer to Chart (On Right) Power Seven Series 58” (1475mm) MACHINE LENGTH - Refer to Chart (On Right)

AMERICAN TURNMASTER POWER SERIES OPTIONS & ACCESSORIES Available Options & Accessories STEADY REST FOLLOW REST FACE PLATE CHUCK GUARD TOOL GRINDER TAPER TURNING ATTACHMENT MICROMETER CARRIAGE STOP DIGITAL READOUT & GLASS SCALES

Superior Features • American Turnmaster lathes have been sold by Republic Lagun for over 30 years • Designed and engineered for turning heavy parts efficiently • Massive construction endures maximum stability under extreme cutting conditions • 3 bearing spindle support with opposed Timken® taper roller bearings • CNC versions also available • Large compliment of options and accessories in stock • Service and parts readily available 800 Sprucelake Drive, Harbor City, CA 90710 USA (800) 421-2105 • (310) 518-1100 • Fax: (310) 830-0923 Web: www.lagun.com • Email: [email protected]