Salient Features:

• The FPEM-1210P-A0201L-V2 I/O module enhances Flexipanel® HMIs with increased PLC functionality.
• Compatible with FP2-E (Basic HMI Series) and FP4-E (Advanced HMI Series).
• Includes 12 bi-directional type inputs, 10 PNP type outputs, 2 analog inputs (16-bit resolution), and 1 analog output (12-bit resolution).
• CE marked and UL listed for compliance.

Model Specification:

• Part Number: FPEM-1210P-A0201L-V2
• Power Supply: 24VDC (±15%), 12V from base.
• Input/Channel Power Rating: 24VDC, 5mA typical.
• Output/Channel Power Rating: 250mA @ 24VDC.
• Optical isolation for all I/O points with high isolation voltage (BV > 1.5kV).

Local I/O Specification:

• 12 bi-directional type inputs with ON voltage range of 15VDC to 30VDC and OFF voltage range of -3VDC to 3VDC.
• 10 PNP type outputs with nominal output voltage of 30VDC and current of 250mA per channel.
• Response time for both inputs and outputs is 10ms for ON and OFF states.

Analog I/O Specification:

• 2 analog input channels with 16-bit resolution supporting 0-20mA, 4-20mA, 0-10VDC, and 0-5VDC.
• 1 analog output channel with 12-bit resolution supporting similar ranges.
• Accuracy is ±0.2% of full scale at 25°C.

Environmental and Approvals:

• Operating temperature range is 0 to 60°C (0 to 50°C for UL).
• Storage temperature range is -20 to 85°C.
• Humidity tolerance is 10 to 90% non-condensing.
• Product dimensions are 48mm x 108mm x 35.7mm (W x H x D).
• Approved by CE and UL.

Mounting Details:

• Compatible with 4.3’’, 7’’, and 10.1’’ base HMI models.

Ordering Information:

• Model: FPEM-1210P-A0201L-V2 with specified input and output configurations.

Additional Notes:

• FPEM-V2 Series is only compatible with FP2xxxTx-E/ FP4xxxTx-E Series.
• Currently, the series does not support HSC-PWM output, but firmware upgrades will enable this feature.