*mydirectindustry

Catalogs
Renu Electronics GmbH
FPEM-0808RP-A0401U-V2

FPEM-0808RP-A0401U-V2

1 / 3 PagesView full catalog

FPEM-0808RP-A0401U-V2

Product catalog summary

Salient Features:

The I/O module enhances Flexipanel® HMIs with increased PLC functionality.
Compatible with FP2-E (Basic HMI Series) and features 8 bi-directional inputs, 8 digital outputs (6 relay, 2 PNP), 4 universal inputs (16-bit resolution), and 1 analog output (12-bit resolution).
CE marked and UL listed for compliance.

Model Specification:

Part Number: FPEM-0808RP-A0401L-V2
Power Supply: 24VDC (±15%), 12V from base.
Input/Output Specifications: Optical isolation for all I/O points with high isolation voltage (>1.5kV).
Environmental Conditions: Operating temperature 0 to 60°C (UL 0 to 50°C), storage temperature -20 to 85°C, humidity 10 to 90% non-condensing.
Dimensions: 48mm x 108mm x 41mm (W x H x D).

Analog I/O Specification:

Analog Inputs: 4 universal input channels with 16-bit resolution supporting various input types including mA, VDC, mV, RTD, and thermocouple inputs.
Analog Output: 1 channel with 12-bit resolution supporting 0-20mA, 4-20mA, 0-10VDC, and 0-5VDC.
Accuracy: ±0.2% of full scale at 25°C and ±0.5% over the temperature range.

Functionality and Compatibility:

Compatible with FP2xxxTx-E/FP4xxxTx-E Series.
Current hardware revisions support HSC-PWM output after firmware update.

Ordering Information:

Model: FPEM-0808RP-A0401L-V2 with specified input and output configurations.

Contact Information:

Head Office: Pune, India. Tel: +91 20 2729 2840 - 46, Email: [email protected]
Factory: Pune, India. Tel: +91 20 6687 2900
Regional Offices: Ahmedabad, Bangalore, Chennai, Coimbatore, Kolkata, Mumbai, New Delhi
Overseas Distributors: USA, Europe, Asia Pacific

Notes:

Specifications are subject to change without prior notice.
Firmware is upgradable for the FPEM-V2 series to support HSC-PWM output.

Catalog excerpts

FPEM-0808RP-A0401U-V2SALIENT FEATURES > This I/O module expands the capabilities of the Flexipanel® HMIs for increased PLC functionality > Pluggable expansion I/O Modules for FP2-E (Basic HMI Series) > 8 Bi-directional Type Inputs > 8 Digital Outputs (6 Relay and 2 PNP Type Outputs) > 4 Universal inputs (16-bit resolution) & 1 Analog output (12-bit resolution)

Open the catalog to page 1

Mounting with 7" base HMI model: www.renuelectronics.com

Open the catalog to page 2

MOUNTING DETAILS Mounting with 10.1'' base HMI model: [Note: All Pictures shown are for illustration purpose only. Actual product size may vary.] Dimensions Note: 1. FPEM-V2 Series only compatible with FP2xxxTx-E/ FP4xxxTx-E Series] 2. FPEM-V2 series do not support HSC-PWM output (for now). 3. Firmware is upgradable for the FPEM-V2 series. Moreover, after the Firmware update, HSC-PWM output will support this series. HEAD OFFICE Survey No. 2/6, Baner Road, Tal - Mulshi, Pune - 412115, India. Tel: +91 20 6687 2900 REGIONAL OFFICES • Asia Pacific (Preliminary Datasheet. Specifications subject to...

Open the catalog to page 3

FPEM-0808RP-A0401U-V2

FPEM-0808RP-A0401U-V2

Catalog excerpts

All Renu Electronics GmbH catalogs and technical brochures

Archived catalogs