Product Code FP4043CN: 4.3”, 480 x 272 pixels, WSVGA color TFT with capacitive touch screen with 2 serial ports#, one USB Type-C port, one USB Host port & 1 Ethernet Port. FP4070CN: 7”, 1024 x 600 pixels, WSVGA, 7” color TFT with capacitive touch screen with 2 serial ports, one USB Type-C port, one USB Host port & 1 Ethernet Port. FP4101CN: 10”, 1024 x 600 pixels, WSVGA, 10.1” color TFT with capacitive touch screen with 2 comm. port, one USB Type-C port, one USB Host port & 1 Ethernet Port. User should follow the given sequence to configure and use any FlexiPanels series unit: 1. Install FlexiSoft Software. 2. Create a FP application using FlexiSoft software. 3. Connect programming cable. 4. Download Firmware i.e. driver for the HMI. 6. Now FP unit is ready to use in the system. Qrenu For More Information, Visit http s://www.re nue lectron ics.com Panel Dimensions Panel Cutout Dimensions: 111.00 (W) x 80.00(H) mm Panel Thickness: Maximum 6mm Mounting Clamps: 2 _mo| Power (Base) [# Note: FP4043CN supports one DB9 port that supports RS232 & RS485 levels on different pins. “Y” type cable can be used for separate RS232 and RS485 levels simultaneously.] [*Note: For UL, operating temperature range is 0° to 50°C.]

4 Wire RS485 connections: Driver end (PLC side or 2 wire network side) Signal RX+ -- Earthing The optimum method for earthing electronic equipment is to earth it separately from other high-power systems, to earth more than one unit of electronic equipment with a single-point earth. The earthing marked terminal (see below) is provided on the unit. [Note: Do not use an earth that has an unstable impedance, such as painted screws or earth subject to vibration.] • WARNING - EXPLOSION HAZARD - Substitution of components may impair suitability for Class I, Division 2. The list of materials used in...