Exhibit with us
*mydirectindustry  
English
  1. Catalogs
  2. Renox Flow
  3. Tubular heat exchanger

Tubular heat exchanger

Tubular heat exchanger
1 / 1 PageView full catalog

Tubular heat exchanger

Product catalog summary
Overview: The document outlines key components of a tubular heat exchanger system, emphasizing their integration-ready nature for both upgrading existing lines and building new systems. These components are designed to ensure consistent product quality and cost efficiency.
Specifications:
  • The standard design pressure is considered only from a pressure perspective, with a caution not to exceed the maximum design temperature when using steam.
  • Saturated steam at 160°C (320°F) corresponds to 6 bar.
  • Design pressures: Tube side - 1500 kPa, Shell side - 1000 kPa.
Models and Design:
  • RT-CIP models range from 0.51x1.5 to 101x2, with corresponding shell side flanges and pressure standards.
  • Materials used include AISI 316 (L) and AISI 304 (L) with a design temperature of 160°C.
Flow Rate and Temperature:
  • Flow rates range from 15 to 60 m3/h, with different RT-CIP models recommended for varying temperature ranges (50-70°C, 60-80°C, 70-90°C).
Selection Table: The table provides guidance on model selection based on flow rate and temperature, with calculations based on steam at 3 bar (134°C) at the medium inlet.
See more

Catalog excerpts

Tubular heat exchanger-1

Whether upgrading an existing line or building a new system, these core components integrate seamlessly. They ensure consistent product quality while helping you achieve better overall costs. Tubular heat exchanger1.The standard design pressure is only considered from a pressure perspective. When using steam, the maximum design temperature of the equipment shall not be exceeded. 2.Saturated steam at 160°C (320°F) corresponds to 6 bar.3.Tube side design pressure: 1500 kPa, shell side design pressure: 1000 kPa. Heat Exchanger Tube AISI 316 (L) Specification & Model Shell Side Flange Flange Pressure Standard Selection Table Note: The calculation in this table is based on the working condition of steam at 3 bar (134°C) at the medium inlet.

 Open the catalog to page 1

All Renox Flow catalogs and technical brochures

  1. Purified water and distribution system
    Purified water and distribution system

    1  Page

  2. Liquid preparation system & Bioreactor
    Liquid preparation system & Bioreactor

    1  Page

  3. CIP Cleaning station
    CIP Cleaning station

    1  Page

  4. Aspetic tank
    Aspetic tank

    1  Page

  5. UHT
    UHT

    1  Page

  6. Pasteurizer
    Pasteurizer

    1  Page

  7. Membrane filtration
    Membrane filtration

    1  Page

  8. High shear mixer
    High shear mixer

    1  Page

  9. High shear mixer
    High shear mixer

    1  Page

  10. Tank, Heat & cooling module, Valve cluster
    Tank, Heat & cooling module, Valve cluster

    1  Page

  11. prepared foods
    prepared foods

    1  Page

  12. Biological Engineering
    Biological Engineering

    1  Page

  13. Beverage
    Beverage

    1  Page

  14. Ice Cream
    Ice Cream

    1  Page

  15. Liquid Dairy
    Liquid Dairy

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.
Are you a buyer?
Are you a supplier?
About Us