Clutches & Couplings Type - REGP The REGP series is a cage comprising of sprag elements running as a freewheel on races primarily measured in inches. This design offers high torque transmission within compact dimensions. In turn this enables cost effective technical solutions. Fitting multiple cages side-by-side increases torque transmission capability.lt is necessary to place one or two bearings next to the freewheel so that the outer race can rotate centrally to the inner race. When this freewheel is used in conjunction with machined seats or shafts, the following specifications must be adhered to: 2) Hardened surface layer to be at least 1mm deep after grinding. 3) Concentric rotation of the races to be ensured. 4) Suitable lubricant to be used for the application. For further information please contact our technical department on +44 (0) 2920 792737 RENOLD CLUTCHES & COUPLINGS Wentloog Corporate Park, Newlands Road, VisitRenoldat: WWW.renold.COm

Clutches & Couplings Type - REGP 1) Inner race is faster than the outer race 2) Outer race is faster than the inner race *) The inner cage centering flange is on the opposite side **) Extension of tolerance to +/- 0,013 permissible

Clutches & Couplings Interchange Chart - REGP v BWX / DC Cage Assemblies * Please contact Renold for advice and alternative product selection. Please note that the number and letter C reference placed in brackets after some part numbers denotes the number of clips used within the retainer construction. This varies by manufacturer. RENOLD CLUTCHES & COUPLINGS Wentloog Corporate Park, Newlands Road, visitRenoidat: www.renold.com