RS-M(F) Booster
4Pages

Screw compressors Pressure: 25 – 40 bar / Motor power: 18.5 – 45.0 k

RENNER Booster screw compressors The RS-M Booster is designed for industrial and economical compressed air generation. The machines are ideally suited for the use of low-pressure systems, where the existing mains pressure for special requirements is compres ed s to any desired final pressure up to a maximum of 40 bar by the integration of a RENNER booster. The booster screw compressors in PET bottle blow molding machines, where the high compressed air requirement of PET blow molding systems is covered in conjunction with an upstream screw compressor, gained the greatest importance. The...

Technical data The RENNER booster increases the pressure at the 1st stage to 40 bar with a maximum flow rate of 10,5 m3/min (depending on the pre-pressure, motor power and other conditions). Inlet pressure: 6 to 13 bar Ambient temperature: 5 to 40°C Outlet pressure: 25 to 40 bar Speed: min. 1,500 / max. 4,500 rpm Pressure rate (Outlet / Inlet): min. 2.5 / max. 6.0 Drive type: belt drive RENNER variable speed control Major fluctuations in compressed air requirements cannot be avoided in many factories. RENNER screw compressors with variable speed control are based on the principle that...

RENNER GmbH Kompressoren, a family run business established in 1994, develops and assembles economical and energy-efficient compressors. A broad range of compressed air accessories are also part of the product portfolio. The structure and size of the company ensure flexible decisions and short lead times, thus providing optimal focus on the requirements of the customers. THE RENNER MANUFACTURING AND SUPPLY PROGRAMME: We can supply you with the right compressor for any application - guaranteed. SCREW COMPRESSORS: • from 2.2 to 355 kW • up to 40 bar, e.g. for manufacture of PET bottles •...