RS(F)-PRO 3,0-18,5
16Pages

Screw compressors

RENNER GmbH Kompressoren – success rooted in tradition. RENNER GmbH Kompressoren have been known for reliable compressed air for 25 years. As a family owned business with fast decision-making processes, we set the benchmarks in developing, manufacturing and selling efficient screw compressors and complete compressed air stations. RENNER has more than 160 employees to provide you with first-class technical advice, robust compressor engineering, and reliable service in virtually more than one hundred countries. We offer fast maintenance services in Germany and all over the world through our...

RS-PRO screw compressors – RENNER‘s compact, robust, high-performance range. Oil-injected screw compressors in the appropriate power range nowadays represent the most modern and most economical form of compressed air generation. RENNER is dedicated to this compression principle, with a performance range extending from 2.2 – 355 kW and an end pressure of up to 15 bar. RENNER screw compressors with asymmetric profile are designed for powerful industrial operation, with no compromise. Excellent economy, long service life, and simple, economical maintenance are the most important criteria in...

Belt tension Belt tensioning is effected by means of a motor rocker. The optimum sling arrangement of the belt around the pulley ensures even better power transfer. The RS-PRO is optionally available with a pre-filter frame to protect against dirt contamination. The frame can be attached very simply by means of magnets. The RSF-PRO range is built standard with radial fan. Thanks to the efficient rear duct silencer and the new radial fan, noise levels are reduced to a minimum. Protected frequency converter The frequency converter is separated from the air supply of the compressor by a metal...

Energy savings: compressors with variable speed control. The RSF-PRO series is characterized by quality and efficiency. RENNER screw compressors with variable speed control are designed for tough industrial applications. Additionally the compressors are equipped with the RENNERtronic Touch intelligent control and monitoring system. Do you know how much energy your compressed air station requires and how much goes to waste? Comparing total cost after 5 years: About 60,000 compressed air stations in Germany consume 14 billion kWh of electricity annually. This corresponds to 5% of the...

Screw compressors RS-PRO 3.0 - 18.5 RSK-PRO 3.0 - 18.5 with refrigeration dryer RS-PRO 3.0 - 18.5 / RSK-PRO 3.0 - 18.5 (1) according to ISO 1217 Annex C (2) according to DIN EN ISO 2151:2009 (3) without rear duct silencer / with rear duct silencer / with super rear duct silencer (4) with rear duct silencer (5) with rear duct silencer / with super rear duct silencer All models with ball valve and electrical feed cable. Star-delta-starter for all 3.0 kW and 4.0 kW compressors (from 5.5 kW inclusive) 10866 Rotation direction control via phase rotation control 10867 Electronic control...

Screw compressors RSF-PRO 5.5 - 18.5 RSKF-PRO 5.5 - 18.5 with refrigeration dryer all with variable speed control, pre-filter frames and electronic control RENNERtronic Touch (1) according to ISO 1217 Annex E (2) REflex function: 6 to 10 bar, continuously variable (3) according to DIN EN ISO 2151:2009 All models with ball valve and electrical feed cable. Electronic control RENNERtronic Plus Touch 23836 Level actuated drain for refrigeration dryer 05311

Screw compressors RSD-PRO 3.0 - 18.5 on galvanized air receiver air receiver according to AD2000 directives (from 250 ltr with hand hole) RSD-PRO 3.0 - 18.5 (1) according to ISO 1217 Annex C (2) according to DIN EN ISO 2151:2009 (3) without rear duct silencer / with rear duct silencer / with super rear duct silencer (4) Type examination is available. (5) with rear duct silencer All models with ball valve and electrical feed cable. Options Part no. Star-delta-starter for all 3.0 kW and 4.0 kW compressors (from 5.5 kW inclusive) 10866 Rotation direction control via phase rotation control...

Screw compressors RSDF-PRO 5.5 - 18.5 on galvanized air receiver, with variable speed control, pre-filter frames and electronic control RENNERtronic Touch air receiver according to AD2000 directives (from 250 ltr with hand hole) 111 according to ISO 1217 Annex E 121 REflex function: 6 to 10 bar. continuously variable 131 according to DIN EN ISO 2151:2009 141 Type examination is available. All models with ball valve and electrical feed cable. 111 according to ISO 1217 Annex E 121 REflex function: 6 to 10 bar. continuously variable 131 according to DIN EN ISO 2151:2009 141 Type examination is...

Screw compressors RSDK-PRO 3.0 - 18.5 with refrigeration dryer, on galvanized air receiver air receiver according to AD2000 directives (from 250 ltr with hand-hole) RSDK-PRO 3.0 - 18.5 (1) according to ISO 1217 Annex C (2) according to DIN EN ISO 2151:2009 (3) with rear duct silencer / with super rear duct silencer (4) Type examination is available. (5) with rear duct silencer All models with ball valve and electrical feed cable. (1) according to ISO 1217 Annex C (2) according to DIN EN ISO 2151:2009 (3) with rear duct silencer / with super rear duct silencer (4) Type examination is...

Screw compressors RSDKF-PRO 5.5 - 18.5 on galvanized air receiver, with variable speed control, pre-filter frames and electronic control RENNERtronic Touch air receiver according to AD2000 directives (from 250 ltr with hand-hole) 111 according to ISO 1217 Annex E 121 REflex function: 6 to 10 bar, continuously variable 131 according to DIN EN ISO 2151:2009 141 Type examination is available. All models with ball valve and electrical feed cable. Galvanized 500 ltr air receiver (supplement on galvanized 250 ltr air receiver version) 17459 Electronic control RENNERtronic Plus Touch 23836 Kit for...

Screw compressors RSD-PRO-ECN 3.0 - 18.5 on powder-coated ECN air receiver RSDK-PRO-ECN 3.0 - 18.5 with refrigeration dryer, on powder-coated ECN air receiver powder-coated ECN air receivers with inspection opening 2" according to AD2000 directives 111 according to ISO 1217 Annex C 121 according to DIN EN ISO 2151:2009 131 without rear duct silencer / with rear duct silencer / with super rear duct silencer (4) with rear duct silencer 151 with rear duct silencer / with super rear duct silencer All models with ball valve and electrical feed cable. Star-delta-starter for all 3.0 kW and 4.0 kW...