Compressor Control Systems
12Pages

Compressed air management systems Control systems for compressors and compressed air stations RENNERtronic Touch RENNERtronic Plus Touch RENNERcontrol Touch

RENNER compressor control systems Compressed air supply must work reliably and economically. RENNER intelligent control systems ensure that for as well single compressors as compressed air stations. RENNERlogic – RENNER‘s standard control system RENNERlogic – a control that is both functional and simple with many features and benefits! Features: • Start button: for starting the compressor. • Stop button: the compressor switches to run-on time. • Emergency stop: in dangerous situations the compressor is switched off immediately. • LED display: the compressor status is displayed by various...

NEW! RENNERtronic Touch Smartphone-like operation: Intuitively operable touchscreen on state-of-the-art technology. Events history: The last 50 messages are displayed including date and time. Service indicator: Maintenance message will be shown when the set operating hour intervals is reached or at the latest after one year. Pressure and temperature diagram: Extensive statistics on pressure and t emperature diagrams with hourly scaling. Display of compressor utilisation: Recording of operating and load hours as well as the percentage load for compressors with variable speed control. Timer...

NEW! RENNERtronic Plus Touch with additional functions The RENNERtronic Plus Touch fulfils all the functions of the RENNERtronic Touch. But it can do even more! 7“ touchscreen: Overview a multitude of information simultaneously and clearly. Timer with eight channels: In addition to the above-mentioned functions, priorities for Base Load Change Over can also be assigned via the timer. Pressure and temperature diagram: Extensive statistics on pressure and t emperature diagrams with daily, weekly and monthly scaling. Base Load Change Over: The software is equipped with an extensive Base Load...

BLCO installed in compressor Features: • The master unit must have a RENNERtronic Plus Touch. • Up to eight slave compressors can be connected. • All other compressors are connected via a Modbus RTU module. • Compressor of other manufacturers require a connection module. Connecting cable RENNERsimply-connect BLCO Master (RENNERtronic Plus Touch) K1 Connecting cable RENNERsimplyconnect K2 BLCO Slave (RENNERlogic) BLCO Slave (RENNERtronic (Plus)) BLCO Slave (RENNERtronic (Plus) Touch) K5 BLCO Slave (compressor of other manufacturers) Features: Several frequency-controlled units can be...

BLCO in wall mounting box (RENNERcontrol Touch) RENNERcontrol Touch is a base load change over in a wall mounting box with web visualization and touchscreen. It is available in different versions. E-mail dispatch Signal pillar RENNERcontrol Touch Pressure sensor Connecting cable RENNERsimply-connect K1 RENNERlogic Connecting system RENNERsimply-connect Logic K2 RENNERtronic (Plus) Connecting system RENNERsimply-connect Tronic (Plus) RENNERtronic (Plus) Touch Modbus RTU module Compressor of other manufacturers Connecting module BLCO Slave Connecting system RENNERsimply-connect Logic Circuit...

The basic view shows the current network pressure, the current state of the compressors as well as date and time. Detailed information can be retrieved by directly selecting the respective data. The status history makes it possible to follow the progress of the compressor states in a graphic. A differentiation is made between the following states: load with indication of the frequency converter value, idle, ready, off, fault and bus error. The current status is displayed, with information about the frequency converter value, the oil temperature and the pressure in the compressor view. The...

RENNERconnect with 7“ touchscreen Does your compressed air station work economically? RENNERconnect is a higher level, intelligent control system for optimal management and monitoring of your compressed air station. RENNERconnect contributes to efficiency and is highly reliable. Intelligent, air-demand based connection of the compressors provides not only a high energy savings potential, but also ensures increased operational reliability of your compressors. The control can be operated intuitively and safely via the integrated touchscreen. Connectivity: Server VPN Sensor cable Up to 3...

Features of the RENNERconnect: 1) Regardless of the compressor type, up to 16 compressors can be controlled: • RENNER compressors • Compressors of other manufacturers • Standard compressors with load and no-load control 4) RENNERconnect can connect to various additonal components in your compressor room and monitor them (e.g. dryer, drain, dew point sensor, flow sensor, additional pressure sensors). 5) DIN ISO 50001: The control system can be used as energy manage ment tool according to DIN ISO 50001 (section 4.6.1. monitoring, measurement, analysis). Contact us, we gladly rovide you with p...

Web server for the RENNERconnect control system In control of your compressed air station - always and everywhere • Web server software is part of every RENNERconnect control system. • All current measurements are displayed on web server. • Up to date online analysis of the operation of the compressors and other equipment. • Statistical analysis of all parameters in daily, weekly, or monthly reports. • Compressors and equipment can be set and parameterized via web server. • Optionally: automatic forwarding of daily reports. • Calculation of service dates in accordance with operating hours...

Main View View of all connected compressors and sensors. All connected sensors can be displayed graphically. Exceeding or under shooting alarm thresholds triggers selectable alarm responses. With the integrated panel designer, you can create a professional image of your station. A clear overall diagram shows at a glance the pressure profile, flow rate as well as the operating times of the compressor. An integrated service and alarm management will be provided by the option „Web server Plus“: • Dispatch e-mails in case of faults, warnings and maintenance. • Message, if limit values of...