Single Marine Gear Solutions
7Pages

Single Marine Gear Solutions Type RSV(L) / RSH(L) 1,000 – 22,000 kW

RSV/RSH Gearboxes – High performance, energy-efficient, reliable. RSV(H)(L) R = RENK AG S = Single Marine V = Vertical Offset H = Horizontal Offset L = Multiple Disc Clutch C = Compact Version More than 140 years of experience are the basis for the production of highly developed and efficient gearboxes, which are used in thousands of ships all over the world today. Precisely fitting gearboxes are our specialty. We can develop customized solutions for our customers’ demands. RENK gearboxes extend the performance of single engine marine propulsion by offering a number of additional features....

Reliability through precision – The three pillars of RSV/RSH technology Gears which mesh perfectly A solid foundation and strong casing withstand high strain Our gears are designed for maximum safety as well as minimum noise and vibration. The technological basis is the optimum fine tuning of the macro and micro gear geometry. The design of the casing and foundation has a considerable influence on the load-carrying characteristics of the gears and bearings as well as noise absorption and vibration during operation. RENK casings have high stiffness due to the use of torsion-resistant...

Customized gearbox solutions Our customized gearbox solutions are setting standards at sea Reduction from main engine to propeller is realized in one step with optimized efficiency Case-hardened helical gearing with high-addendum toothing allows minimal torsion even under full loads. RSV(L)/RSH(L) are supported on sleeve bearings according to DIN 7474 Ready-to-use auxiliary equipment: pumps, coolers, control and monitoring systems are readily piped and wired and mounted on the gearbox. To absorb the axial forces of the propeller, RENK supplies all gearboxes with an integrated thrust bearing...

Main Dimensions RSVL (PPTO/PTI) APTO Position Shaft Position Head option Main Dimensions RSVL (PTO/PTH/PTI) with Quillshaft design Head option 1) „Enlarged“ means that connecting pin and input shaft bearing are in the enlarged version. The „enlarged“ version is selected whenever shaft calculation requires this

RENK product support – competent, effective and always there for you Efficient energy management for your ship Efficient and flexible distribution of the complete energy available on board. In this way you can reduce energy costs, increase comfort and keep your ship maneuverable in case of emergency. PTO – more power flexibility for your ship PTO offers additional electrical power possibilities for different applications. Secondary PTO (SPTO) Simultaneous operation of shaft generator and propeller PTI & PTH – Higher power and additional safety for ship propulsion systems In PTI-mode the...

RENK Aktiengesellschaft Rheine Plant Rodder Damm 170 48432 Rheine Germany Phone: +49 5971 790-0 Fax: +49 5971 790-208 Email: info.rheine@renk.biz