TP200 precision touch-trigger probe system with stylus changer • High speed stylus changing Precision measuring performance with stylus lengths of up to 100 mm Module life of over 10 million triggers Compatible with the full range of Renishaw M8 probe heads (PH10M/MQ via PAA) and extensions bars System description TP200 is an electronic probe using strain gauge technology which gives higher accuracy than kinematic touch-trigger probes. TP200 combines outstanding metrology performance with superior functionality to produce a highly versatile DCC CMM probing system with excellent productivity. The TP200 system components are the TP200 probe body, TP200 stylus module, PI 200 probe interface and SCR200 stylus change rack (optional). TP200 probe The TP200 probe incorporates micro strain gauge transducers, delivering excellent repeatability and accurate 3D form measurement, even with long styli. The solid-state ASIC (application specific integrated circuit) electronics within the probe ensure reliable operation over millions of trigger points. The stylus module is mounted on the probe via a highly repeatability magnetic kinematic joint, providing rapid stylus changing capability and probe overtravel protection. There are three stylus modules available offering two different overtravel forces. The standard force (SF) module is suitable for most applications. The low force (LF) module is recommended for use with small precision ball styli or on delicate material. The extended overtravel (EO) module has the same overtravel force as the standard module but has an addition 8 mm of overtravel in the Z axis to protect against damage. PI 200 probe interface The PI 200 is capable of automatic recognition and interfacing of the TP200 probe or conventional touchtrigger probes (TP2, TP6, TP20). During high speed position moves, the PI 200 is able to minimise probe sensitivity to prevent vibration triggers, but, a trigger will be transmitted in the event of a collision. SCR200 The SCR200 has six ports and provides rapid, automatic changing of the stylus modules without the need to re-qualify stylus tips. The SCR200 is powered entirely by the PI 200 and provides features to facilitate safe stylus changing. Accessories The Renishaw ‘GF’ range of styli and extension pieces, incorporating carbon fibre reinforced plastic (CFRP) stems, is available for applications requiring high performance and long reaches. The TP200 is supplied with specialised material for cleaning the kinematic co

Magnetically retained kinematic coupling Status LEDs Probe sensor Stylus module 30 mm (1.18 in) Kinematic plate Alignment feature STANDARD FORCE Standard force module For styli up to 100 mm length, >Ø1 mm ball +Z overtravel 4 mm (0.16 in) Maximum XY overtravel -Z overtravel by separation of the module from the sensor Low force module For styli up to 50 mm length, <Ø1 mm ball Specification Application Universal CMM precision touch-trigger probe Sense direction 6-way: ±X, ±Y, ±Z Measuring performance * 10 mm stylus 50 mm stylus TP200 (TP2) TP200 (TP2) (0.35) 0.40 (1.00) 2σ unidirectional repeatability...

Specification Weight Mounting orientation Mounting fixture Number of ports Repeatability of stylus change (2σ) at 50 mm Entry speed Module pull-off force Overtravel protection LED indicators 0.75 kg Vertical or horizontal Single stud (M8, M10) 6 Automatic Manual Unrestricted 800 g maximum Electromechanical (5° minimum deflection) Power Green Status Red (flashing during probe inhibit) Change cycle detection Optoelectronic beam system with Hall effect proximity sensor Multi-rack usage Up to two SCR200 units (12 units) may be connected with a special cable Installation All alignment requirements and...

Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom Front panel Rear panel Specification Size Mounting Weight Power supply Probe compatibilty Probe recognition Power connector Probe input connector Probe output connector SCR200 connector Temperature range 1/3 19” rack × 2U high (140 mm × 88 mm × 183 mm) 19” rack mounting or freestanding 1.6 kg Universal: 85 - 264 V, 50 / 60 Hz TP200 or TP2 / TP6 probes Automatic, ≤ 1.5 s IEC 320 9-way D socket (Renishaw PICS standard) 9-way D plug (Renishaw PICS standard) or 7-pin DIN SSR socket 6-pin miniature DIN socket Operating...