Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom RSP3-6 extended reach probe Enhanced access and inspection capability with RSP3-6 RSP3-6 Key benefits Reach Available with straight extensions up to 800 mm from REVO’s A-axis centre of rotation, and cranked extensions up to 600 mm from REVO’s A-axis centre of rotation. Accuracy Scanning accuracy: Typically better than 10 µm form error (filtered) and 5 µm diameter error Touch-trigger accuracy: Typically better than 3 µm form and diameter error Part of the REVO 5-axis multi-sensor system Long extensions combined with 5-axis movements for better part access, and multi-sensor changing for increased flexibility. The other RSP3 probes within the range (RSP3-1, -2, -3, -4) can be used for 3-axis scanning with fixed REVO head angles during measurement, providing the REVO system with 3D-scanning (X, Y, Z) with crank stylus capabilities. It also allows different lengths of styli to be used whilst maintaining optimum metrology performance. The RSP3-6 provides enhanced capability for accessing deep bores and inspecting features within large parts. It is available with a range of stylus holders for applications requiring straight and cranked extensions and can be used for both touch-trigger and 2D scanning applic

Performance Scanning of a ring gauge REVO A-axis centre of rotation Form error (F) and diameter error (D) Test setup criteria Stylus used Renishaw’s M2 stylus range Data filter used Harmonic simple cut off order = 60 UPR (undulation values) Artefacts used Ø45 mm (nom) calibration sphere (for the calibration) Ø50 mm (nom) ring gauge (for the ring gauge tests) 5 mm/s (for the ring gauge scan tests) Touch speed 2 mm/s (for the ring gauge touch tests) Bi-directional scans Bi-directional scan data is quoted to demonstrate the performance of the Renishaw probe calibration method Scanning speed

Touch-trigger probing of a ring gauge Form error (F) and diameter error (D) EWL = effective working length

Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom REVO A-axis centre of rotation Measurement range ±0.5 mm deflection in all directions in all orientations X, Y +Z Overtravel range 300 g (10.58 oz) (excluding stylus holder and stylus) RSP3-6 + RSH3-6c-500 EWL 348 mm (13.70 in) RSP3-6 + RSH3-6c-600 EWL 448 mm (17.64 in) Effective stylus length range Using M2 star centre Using 10 mm stylus RSP3-6 + RSH3-6c-500 50 mm (8 g) * Maximum permissible stylus Mounting Crash protection Magnetised kinematic coupling ±X, ±Y, ­ Z - Via break out of probe or stylus holder Via...