The REVO-2 dynamic measuring system is designed to maximise measurement throughput whilst maintaining high system accuracy. REVO-2 is the only scanning system for CMMs that simultaneously controls the motion of three machine and two head axes whilst collecting work piece data using its range of 2D and 3D tactile probes, surface roughness measurement probe and now non-contact vision probe too. The head’s design incorporates sophisticated laser measurement and electrical signal transmission technology for precise work piece measurement at extremely high rates of data capture. The 5-axis control system removes unwanted dynamic errors associated with machine movement because the measuring head performs most of the work. As the head is much lighter and more dynamic than the CMM, it is able to quickly follow changes in the part geometry without introducing large dynamic errors. RSP2 is a dedicated lightweight probe for use on REVO systems, capable of 2D-scanning (x, y) and 3D touch-trigger measurement (x, y, z). The RSP2 has a universal body to which a number of different length stylus holders, with a minimum reach of 175 mm* and a maximum reach of 500 mm*, can be fitted. The RSP2 utilises Renishaw’s tip-sensing technology, specifically designed for high speed scanning with low scanning forces and minimal stylus wear. The UCCserver software manages the type of stylus that can be used with RSP2, ensuring that optimal metrology performance is achieved. RSH450 *The number behind RSH represents length from head centre of rotation to stylus ball centre when carrying a 10 mm stylus.

Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire, GL12 8JR United Kingdom RSP2 and RSH# changing system The RCP TC-2 (thermally controlled REVO change port) is used for changing RSP2, whereas the RCP2 (REVO change port) is configured to change RSP2 stylus holders (RSH175, RSH250, RSH350, RSH450 and RSH500). REVO-2 specification Scan speed Data collection rate Operating temperature Storage temperature Weight (excluding probe and cables) Height (overall) 176.5 mm (6.95 in). Quill to probe mount, including 4 mm mounting plate B-axis dimensions A-axis swept diameter Movement speed A-axis...