Catalogs >
RENISHAW >
PH10 PLUS motorised probe head range

PH10 PLUS motorised probe head range
2Pages

Catalog excerpts

PH10 PLUS motorised probe head range - 1

Renishaw plc New Mills, Wotton-under-Edge, Gloucestershire GL12 8JR United Kingdom PH10 PLUS motorised probe head range PH10 PLUS The range of PH10 PLUS motorised probe heads increases throughput by giving automated CMMs the added capability of program controlled probe reorientation. This enables the inspection of features at different angles without the need for frequent, time consuming stylus cluster changes. PH10 PLUS heads are compatible with a range of both contact and non-contact scanning sensors and touch-trigger probes, allowing the size and form of critical features to be determined. When used in conjunction with the PH10M PLUS or PH10MQ PLUS, Renishaw’s autochange systems provide fast, repeatable probe and extension bar exchange, without the need for re-qualification of the stylus tip, helping to maximise productivity. Since 1988 the PH10 heads have been installed on thousands of co-ordinate measuring machines and Renishaw has engaged on a continuous development program resulting in several important enhancements through the product’s history including: - Significant mechanical design improvements - Improved repeatability and long term stability - LED replaced with light guide (red when powered on and white when off) - Ability to store usage history for subsequent analysis - 2 year warranty as standard. Accuracy Repeatability specification is a market leading 0.4 μm at a 100 mm radius from the centre of rotation of the axis, providing accurate positioning even when using long extensions. Repeatable kinematic location The PH10 PLUS uses a six point kinematic location for each of its 720 indexable positions, making its locking mechanism the most repeatable on the market. Increased throughput The PH10’s ability to index automatically reduces the number of stylus changes required, thereby increasing the throughput of your CMM. Indexing is faster than stylus changing. Increased reach and flexibility Extension bars up to 450 mm long, together with the full range of Renishaw autojoint and M8 probes, can be used with the appropriate head types. The Renishaw autojoint This industry standard feature allows repeatable automated probe exchange without the need for stylus requalification. UCC compatibility The PH10 PLUS can be used in conjunction with Renishaw’s UCC controller family, providing a comprehensive retrofit solution for a

Open the catalog to page 1

PH10 PLUS motorised probe head range - 2

Specification Head type Weight CMM mounting Probe mounting Renishaw autojoint (multiwired) M8 threaded probes can be used with PH10MQ/M PLUS via PAA probe adaptor Head controller 0.4 µm (0.00002 in) specified at a distance of 100 mm (3.94 in) from the A-axis centre of rotation Cycle time: 7.5° move 90° move Total angular movement: A axis B axis 2.5 seconds 3.5 seconds aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa aaa 0° to 105° in 7.5 steps 0° to ±180° in 7.5 steps Total number of positions Maximum drive output torque Maximum extension bar 300 mm (11.8 in) using PAA3 probe adaptor 450 mm...

Open the catalog to page 2

PH10 PLUS motorised probe head range 2Pages

Catalog excerpts

All RENISHAW catalogs and technical brochures

PH10 PLUS motorised probe head range
2Pages