Catalogs >
RENISHAW >
Data sheet: MH20 and MH20i

Data sheet: MH20 and MH20i
1 / 4Pages

Catalog excerpts

MH20 and MH20i Manual adjustable probe heads with module changing • Incorporates TP20 kinematic mount • �� Incorporates TP20 kinematic mount • Infinite positioning within the • 168 repeatable positions in 15° increments� . with two axis adjustable swivel. changing, providing head adjustment has not taken place. with two axis indexing. movement envelope of the head. • Repeatable TP20 stylus module • Repeatable TP20 stylus module changing in each pre-qualified posi

Open the catalog to page 1

Datasheet H-1000-2195-03-A MH20 & MH20i family The MH20 and MH20i are manually operated probe heads that articulate to provide orientation of the probing axis. MH20 provides non-repeatable orientation, while MH20i permits repeatable indexing in 15° increments. Both heads feature TP20 kinematic probe module mounting, allowing repeatable stylus module changes. MH20 and MH20i are compatible with the full range of TP20 stylus modules, which comprises 5-way versions with length or trigger force options and a 6-way version. Both heads feature a red LED, which indicates probe status, controlled by...

Open the catalog to page 2

Probing forces and overtravel limits TP20 probe module The TP20 probe module houses the kinematic switching touch mechanism, carries the stylus assembly and provides overtravel in the X, Y, and +Z axes. Probe module stylus length Alignment Trigger force symbols Nominal at The probe module is held in position on stylus tip the head by a highly repeatable kinematic XY coupling. Electrical contact pins conduct the probe sense voltage through the coupling. Features are also included which minimise the possibility of Z a mis-aligned probe module generating a probe-seated signal. The M2 stylus...

Open the catalog to page 3

Renishaw plc New Mills, Wotton-under-edge, Gloucestershire, GL12 8JR United Kingdom ❃ Length - see chart on previous page ❃ Length - see chart on previous page ❖ from shank mounting face Part numbers and ordering information MH20 and MH20i are supplied with the shank fitted. To select the correct shank for your application please refer to H-1000-5050 section 9, then follow the part number selection criteria detailed below. Description Part number MH20 + MS1/T Shank A-4043-xx01 * MH20 + MS2/T Shank A-4043-xx02 * MH20 + MS3/T Shank A-4043-xx03 * MH20 + MS5/T Shank A-4043-xx05 * MH20 + MS7/T...

Open the catalog to page 4

Data sheet: MH20 and MH20i 1 / 4Pages

Catalog excerpts

All RENISHAW catalogs and technical brochures

Data sheet: MH20 and MH20i
1 / 4Pages